Table of Contents
Advertisement
Defrosting/Cleaning
Defrosting
•
The surface of evaporator ices up when the refrigerator
is working. When the frost layer is thick as 3mm, the
refrigerator must be defrosted and cleaned. Otherwise,
it may results in lower effi ciency and high energy
consumption.
•
Set the temperature at '0' position. After defrosting, dry
the water tray and then replace it in the refrigerator.
Reset the temperature regulator to its original position.
Note: Never use a sharp or pointed item to defrost or loose
the ice tray. Otherwise it's likely to damage the surfaces
of the evaporator and result in the leakage of refrigerant.
The manufacturer takes no responsibility for cost of the
reparation even the appliance is under warranty.
When a power failure is announced
•
No defrosting
•
Set the temperature regulator to the highest setting.
•
No more fresh foods are to be stored in the refrigerator.
Power failure
•
Do not open the door more often than necessary.
•
For a power failure not more than 3 hours, foods in the
refrigerator can be well stored even in summer.
Moving the refrigerator
•
Unplug the appliance
•
Take out foods and dry the water tray before moving the
refrigerator.
Note: Do not hold the refrigerator by its door and the piping
of condensor-That's dangerous!
9-EN
English
Advertisement
Table of Contents
