Fiskars StaySharp Max 6201 Instruction Manual

StaySharp Max
™
THE WORLD'S MOST ADVANCED REEL MOWERS
Para ver la versión en español, vaya a la página N
StaySharp Max Contents:
™
( 18" )
Safety Information ................................................................................ 3
THE WORLD'S MOST ADVANCED REEL MOWERS ™
StaySharp
Mower Anatomy .................................................................................... 5
Model Number: 6201
Assembly ............................................................................................... 6–7
Fill in the following information for easy reference.
Adjusting Your Mower .......................................................................... 8–9
Serial Number:________________________________
Checking Cutting Performance ........................................................... 10–11
(located on the lower back portion of the mower)
Using Your Mower ................................................................................. 12–13
Date of Purchase:______________________________
Troubleshooting .................................................................................... 14–15
Care and Maintenance ......................................................................... 16–17
Register:
Go to skars.com/registration
to register your StaySharp Max Reel Mower.
™
LIMITED THREE-YEAR WARRANTY
Fiskars warrants to the original consumer purchaser that its Lawn Mower products are free from defects in materials and workmanship appearing under normal use within three
(3) years after the date of purchase. This warranty does not cover damage to Lawn Mower products caused by abuse, acts of God, your failure to follow product instructions,
mishandling or unauthorized repair. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES; AND ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS WARRANTY. IN NO EVENT
WILL FISKARS BRANDS, INC. BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty
lasts and/or the exclusion or limitation of incidental or consequential damages, so the above limitation and/or the above exclusion may not apply to you. This warranty gives you
speci c legal rights, and you may also have other rights which vary from state to state. As its sole responsibility and your sole remedy for any warranted defect, Fiskars Brands,
Inc. will replace any defective part of the Lawn Mower, containing a warranted defect, free of charge, with proof of purchase and noti cation within a reasonable period of time
(but no longer than 6 months) following the discovery of such defect. For warranty service, email warranty@ skars.com or call 1-877-201-3260.
2
Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers
VersaCut
60% Easier to Push Most reel mowers can be dif cult to push —
What is it? Fiskars' patent-pending VersaCut
especially in longer grass. The advanced technologies combine to
front-wheel cut height adjustment to lift the entire cutting system and maintain
reduce push force by 60%.
superior blade positioning to provide maximum cutting versatility for all types
of grass and mowing habits.
StaySharp ™ Cutting System,
Fiskars Exclusive
How is it different? Standard reel mowers use a rear-wheel cut height
What is it? Fiskars' exclusive StaySharp Cutting System uses precision- adjustment that relies solely on bed knife rotation around the reel. This severely
™
ground, hardened steel blades engineered to ef ciently cut grass without
limits both the maximum cut height and range of cut height and, as a result,
actually touching, greatly reducing friction and blade wear. limits the types of grass that can be cut.
How is it different? Standard reel mowers rely on contact between the cutting
Why is it important? VersaCut
reel and stationary blade for cutting. This steel-on-steel contact creates friction of any reel mower with 1" to 4" cut height settings. The 4" maximum cut height
and causes blade wear. As a result, the blades on standard reel mowers dull is vital when a week of mowing is missed. Moreover, VersaCut
quickly and require costly annual sharpening to maintain peak performance.
superior blade positioning and the extra cutting power of InertiaDrive
combine to effectively cut both cool and warm season grasses, including
Why is it important? Since the StaySharp Cutting System cuts grass
™
tough southern varieties. VersaCut
without the blades touching, friction and blade wear are greatly reduced.
height adjustment for easier, more comfortable use.
As a result, long-lasting performance is maintained without the cost and
inconvenience of annual blade sharpening.
Inset Wheel Design,
InertiaDrive Reel,
™ Patent Pending
What is it? Fiskars' Inset Wheel Design incorporates chain drive to allow
the cutting blades to be positioned in front of the drive wheels and extend
What is it? Fiskars' patent-pending InertiaDrive Reel combines a large-
™
diameter cutting reel and thick blades to store energy (like a ywheel) until a across the full width of the mower.
burst of extra cutting power is needed.
How is it different? Standard reel mowers use gears to transfer rotation
How is it different? Standard reel mowers use small-diameter cutting reels from the drive wheels to the cutting reel. This requires the cutting blades to
be inside the drive wheels, rather than extended across the full width of the
with thin blades. These reels and mowers lack cutting power and frequently
mower. Consequently, standard reel mowers cannot cut across their entire
jam when cutting small twigs, weeds or dense grass. When this happens
the cutting reel seizes, completely stopping the mower. The obstruction width, making close edging impossible and leaving 3" wide uncut strips
under each wheel.
must be removed before mowing can resume.
Why is it important? InertiaDrive Reel uses the mower's large-diameter Why is it important? Since the Inset Wheel design allows the cutting
™
blades to extend across the full width of the mower, there are no uncut
cutting reel and heavy blades to store energy (like a ywheel) until a burst
of extra cutting power is needed. When a tough spot is encountered, the strips under the wheels. It also allows the mower to edge closer than any
other reel mower.
InertiaDrive Reel delivers twice the energy to power through without
™
jamming — providing a superior cut without interruption.
4
Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers
®
o.
19
Before assembling or using the mower, read through the entire
manual and fully understand the safety information.
Do not use mower if in poor health.
™
Max Technologies ............................................................ 4
Do not operate with missing or damaged guards.
Always wear safety glasses, gloves and closed-toed shoes when
operating and maintaining your mower.
Never place hands, ngers or feet in the reel. When the reel is
spinning, it will cut.
Always remove debris from path of mower.
Always have sound footing when using the reel mower, especially on wet
grass or on slopes (inclines).
Use safe lifting practices when moving mower.
Do not allow children under 12 to use mower.
Do not operate around children, other people or pets.
Do not run while using the reel mower.
Do not use mower on surfaces other than grass.
Make sure your mower is in safe operating condition by following the tips
outlined in this manual.
Do not use this mower if it becomes damaged. Call 1-877-201-3260.
83001816r6
™ Technology,
Patent Pending
™ T echnology uses a unique
™ Technology provides the greatest cut range
™ Technology's
Reel
™
™
T echnology also enables one-touch
Fiskars Exclusive
lubrication
Drive
chain*
Drive
system
cover
Large drive
sprocket*
Small drive
sprocket*
Congratulations!
You are now the owner of one of The World's Most
Advanced Reel Mowers™. If you have used a reel mower
before, you will immediately appreciate the advantages
Safety Information
offered by your new reel mower. If this is your rst reel
mower, you will likely require a short transition period as
you adjust to using a reel mower. For more information
on how to enjoy all the bene ts of your reel mower,
see Using Your Mower on page 12. Also, remember that
Fiskars customer service team and website are both
available to you should you need additional help.
Questions? Suggestions?
Don't return to the store. We're here to help.
Call our customer service team at 1-877-201-3260
Visit our website at skars.com/reelmowers
Save this manual for future reference.
Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers
Key Components
Being familiar with the parts and technologies of your
reel mower will make assembly and maintenance
Ergo
much easier. Review the components shown on these
grip
illustrations and refer to them as needed when following
steps outlined in this manual.
Handle
Note: If a clear reel cover is present, remove before use.
Handle shroud
Rear axle
Reel
Adjustment
carriers (2)
Drive dials (2)
system InertiaDrive ™ reel
hole Rear wheels (2)
Cutting reel
Locking bolts
blades (5)
(2 per side)
Side
plates (2)
Grass
Front fork discharge
assembly chute
Cut height
adjustment
cover
Cut height
Stationary
adjustment Front wheels (2) Front fork assembly
blade
knob bearings (2)
*Located under cover (not visible)
Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers
3
Handle bolts (4),
Handle nuts (4),
Handle washers (8) and
Handle bushings (4)
Cotter
pins (2)
Handle
height
adjustment
holes
Handle-
mount pegs
(2)
Rear wheel
bearings
(2)
Cutting reel
bearings*
(2)
Torsion
spring
Lifting
handle
5