Before installing or operating this product, please always read this manual carefully. WARNING: To prevent the risk of fire or electric shock, never expose this product to rain or humidity. ic audio GmbH Boehringerstraße 14a; D-68307 Mannheim; Germany Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26...
RJ45 terminal for easy installation of the system. 2. Features MT-WCP-6 can control the zone, source and Aux 1~3 signal input of MT-AMP 1000. Remote volume control can adjust the output signal level of MT-AMP 1000. LINE IN socket for external music signal input.
The priority is the same as BGM of MT-AMP 1000. 4. MIC Input Balanced MIC Input can give speech to MT-AMP 1000 through MT-WCP-6 . The priority is lower than MIC 1~6 but same priority as Source/Aux 1~3 of MT-AMP 1000.
MT-WCP-6 ic audio 4. Rear panel 1. Data Socket RJ45 data socket for connection between MT-AMP 1000 and MT-WCP-6. 5. Installation 1. Unpack package Open the package box and take out the unit. Please check the accessories: 4 screws and manual 2.
Bedienungsanleitung MT-WCP-6 Fernsteuereinheit für MT-AMP 1000 … to make people listen Status 09/2014...
Page 10
Um das Risiko eines Brandes oder eines Kurzschlusses zu minimieren, das Gerät bitte immer vor Feuchtigkeit schützen. ic audio GmbH Boehringerstraße 14a; D-68307 Mannheim; Germany Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26 E-Mail: info@ic-audio.com; www.ic-audio.com...
Page 12
Es kann eine externe Musik-Quelle und ein Mikrofon an die Fernsteuereinheit angeschlossen werden. Mit RJ45 Buchse für einfachen Anschluss an dem MT-AMP 1000. 2. Features MT-WCP-6 kann die Zonen, Quellen und die Aux 1~3 Signale des MT-AMP 1000 verwalten. LINE-IN Eingang und Lautstärkeregelung für externe Quellen. Symmetrischer Mikrofoneingang für Durchsagen.
Page 13
Die Priorität entspricht der Priorität des BGM-Signals (Hintergrundmusik) des MT-AMP 1000. 4. MIC Eingang Symmetrischer Mikrofon-Eingang für Durchsagen mit MT-WCP-6 in Verbindung mit MT-AMP 1000. Die Priorität ist niedriger als MIC 1-6, hat aber die gleiche Priorität wie Source/Aux 1-3 des MT-AMP 1000.
Page 14
1. Öffnen Sie die Verpackung. Nehmen Sie aus Gerät vorsichtig aus der Verpackung. Prüfen Sie den Packungsinhalt. Lesen Sie die Bedienungsanleitung vor der Inbetriebnahme des Gerätes. 2. Verbinden Sie das CAT5-Kabel mit der RJ45 Buchse des MT-WCP-6 um dem MT-AMP 1000. RJ45 Buchse CAT5-Kabel 3.