Advertisement
USING YOUR WATER KETTLE, con't.
To Heat Water to
Programmed Temperature
1. Fill the kettle with water to the
desired level (between the minimum
and maximum) and place kettle on
the base.
2. Press the temperature selector until
the desired temperature is reached.
Blue dot will indicate the tempera-
ture you selected.
3. Press Start/Stop button. The actual
temperature will be displayed as the
kettle heats up.
4. When water reaches the selected
temperature, the kettle will beep and
then shut off. To turn the kettle off at
any time during use, press the
Start/Stop button.
To Use 'Keep Warm' Function
1. After selecting temperature, press
CARING FOR YOUR WATER KETTLE
To Clean Water Kettle
1. Always unplug the appliance before
cleaning.
2. To clean kettle, rinse occasionally
with clean water. Do not immerse
in water.
3. To clean base, simply wipe with a
damp cloth. Do not use abrasive
detergents. Never rinse or immerse
the base in water. If base has
surface stains or spots, use a
stainless steel cleaning agent.
To Clean Filter
1. Grasp filter and lift out.
the Keep Warm button, then press
Start/Stop. Kettle will keep water hot
for 30 minutes after the selected
temperature is reached. The Keep
Warm button illuminates to indicate
this feature is 'on.' Press Start/Stop
again to turn off this function.
2. After 30 minutes with the kettle
remaining on the base, a beep will
indicate that the keep-warm time
has ended. The 30 minutes will be
reset if the kettle is lifted off the base
and placed back within 2 minutes.
3. When 212°F is selected, the Keep
Warm function will keep the water
temperature below boiling. To bring
it back up to 212°F, press the
Start/Stop button twice. The kettle
will beep to indicate that is has
reached 212°F.
2. Rinse under running water.
3. Place back in the kettle in original
position.
To Decalcify Kettle Interior
Decalcifying is recommended regularly,
depending on water hardness in your
area.
1. Fill the kettle with water and
decalcifier, according to decalcifier
product instructions.
2. Do not boil, as solution may foam
over.
3. When finished, rinse kettle
thoroughly with fresh water.
7
Advertisement
