Advertisement
Connecting to a Security DVR System
Step 1
Connect the BNC and power leads from the camera to the matching
connectors on one end of the power and video cable.
IMPORTANT!
When connecting the power and video cable between the camera and the
DVR, the "male" power end connects to the matching power lead on the
camera.
Step 2
For multi-camera packs, connect the power connector on the other end of the
cable to the power splitter.
For single camera packages, connect the power lead into the power adapter
itself, In this case, you can skip to step 4.
Step 3
Plug the power splitter cable into the camera power adapter.DO NOT plug
the adapter into an outlet at this time. Follow diagram to power additional
cameras.
WARNING!
If you have a multi-camera package, the included power adapter
is designed to provide enough voltage to operate multiple
cameras. Connecting a single camera to the adapter can cause
the optical chipset of that camera to burn out and become
useless. Cameras and 4/8 way splitters can be purchased
separately.
Advertisement
