Advertisement
12
Xtrend
ET4000
3. Power ON/OFF
i
[
: Press
or Press
Menu
There are several ways to turn your STB ON or OFF
● Complete Power Shutdown
There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or
off each time.
It takes a longer time to boot the system if you turned it off by this switch.
● Standby Mode
POWER key is normally used to turn the power of STB on or off. If you press POWER,
it instantly switches your STB off or on.
In this mode, the system is not completely shutdown and thus it takes a shorter time to
turn it on and off.
● Deep Standby Mode
Deep Standby is used to reduce the standby power consumption.
STB is designed to be energy efficient and to guarantee the power consumption to be under
1W in the deep standby mode.
Before Operation, Please read entire Manual thoroughly and retain for future reference.
'Standby/Reset']
For ET4000
Advertisement
