STARTING PEBBELL 2 DEVICE CHARGING The Pebbell 2 device is equipped with an internal rechargeable battery. The autonomy of the battery may vary depending on the GPS and GSM activity and the use of the device. When charging for the first time, please fully charge the battery for around 3~4 hours, using the USB charger or using the docking station to charge.
Page 4
STARTING PEBBELL 2 SWITCHING THE DEVICE ON To turn on the device: Press the side power button for 1 second, all the LEDs will flash rapidly. Device can also be turned on automatically by charging via USB or put into the docking station ...
STARTING PEBBELL 2 WHAT DO THE LIGHTS MEAN? POWER STATUS - LED Blue ON (solid) Blue Blinking Quickly Blue Off or blinking slowly STATE The device is charging Battery power is lower than 15% Device has been fully charged or not charging GSM LED –...
B1, phone number (Example: B1,+447624xxxxxx) Using your mobile phone, example send B1,+447624xxxxxx to the phone number of the device. It will reply: Set mobile number 2 OK! To delete this number, you can send ③Send SMS Command: C1, phone number (Example: C1,+447624xxxxxx) ...
STARTING PEBBELL 2 ACTIVATING SOS “BUDDY” ALARM Press and hold the SOS button for 3 seconds until the device vibrates, and then green light will start to flash rapidly to confirm the request. After that, an SOS Alarm “Help me” – SMS message with LOCATION COORDINATES –...
STARTING PEBBELL 2 LOCATION REQUEST 1. Reply with coordinates and web link Send SMS Command: The device will reply “GPS Info! Time: xxxxx; Lat: xxxx; Lon: xxxx; Spd: xxxxx, Altitude:xxxx Bt: xxx and a link to google map: maps.google.com/maps?q=48.148876,11.542431 By clicking on the link the location will be...
Need help?
Do you have a question about the 2 and is the answer not in the manual?
Questions and answers