Table of Contents
Advertisement
3. Except Windows 98 operation system, you don't need to reboot your
computer. There will be a new icon on your desktop after finishing driver
installation. Please verify that the LINK LED on the USB Powerline
Adapter lights up.
Ethernet Powerline Adapter
1. Insert the packaged CD into your CD-ROM drive, browse the CD the file
PowerlineAdapter.exe (ex: E:\USB DRIVERS\PowerlineAdapter.exe)
and double click it. The utility will be installed into your computer and a
new icon will appear on your desktop. Please verify that the LINK LED
and L/A LED on the Ethernet Powerline Adapter light up.
3.4 Configuring the Powerline Adapter
1. Double click the Powerline Configuration icon shown on your desktop.
The Device tab shows the MAC address of your Powerline device
connected to your computer. If you have installed more than two
Powerline devices, select the preferred one and click Connect to access
your network. Click Refresh whenever you add or eliminate Powerline
devices. The Link Quality depends on the site's power circuit condition,
power stability, etc.
10
Advertisement
Table of Contents
