AAS EPOC-POE-100K User Manual

EPOC-POE-100-SV
Host/Server Side
N-7a
Thi s Ethernet extender consists of one EPOC-POE-100-SV Unit (host/server side) and one
EPOC-POE-100-IPC Uni t (ca mera side). It can transfer Ethernet signal of IPC-Unit to carrier s ignal
though coaxial cable or network ca ble and extend to SV-Unit, then transfer ca rrier signal to
Ethernet s ignal a nd tra nsmit power synchronously. SV-Unit could use 48~57V DC power s upply
or PoE power s upply, which fully meets the needs of long distance Ethernet signal transmission
a nd power s upply. It i s widely used in coaxial ca ble and network ca ble mixed wiring security
s urveillance and network rebuilding projects.
Features
•
Us es coaxial ca ble or network ca bles to tra nsmit Ethernet a nd power s ignals
•
Ma x. di stance up to 500m / 1600ft vi a coaxial ca ble; 400m / 1300ft vi a network cable
•
Adopt a dvanced tra nsmission and power supply technology
•
Ethernet delay l ess than 1ms; meets point-to-point application
•
Sta ndards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3af/at
•
Protecti ons: Excellent ci rcuit isolation protection, superior product a nti-thunder,
a nti -static a nd a nti-interference ca pability
•
Appearance: Meets MIT rack installation s tandard
•
Pl ug-and-play, no setting required
•
48~57V DC power s upply (Not included)
Specifications and appearance are subject to change without notice.
Copyright © 2014 AAS Technology
www.AAS.com.tw

User Manual

PoE Ethernet Extender
Over One Coax Kit
EPOC-POE-100K
Please read the Manual before attempting to use this product.
EPOC-POE-100-IPC
Camera Side
N-7b
(EPOC-POE-100-SV)
..
N-7
R201501-V06