Do you have a question about the REFLECTIONS and is the answer not in the manual?
Questions and answers
Summary of Contents for Even Glow REFLECTIONS
Page 1
DO NOT RETURN THIS PRODUCT TO THE STORE NE PAS RETOURNER CE PRODUIT AU MAGASIN Need Assistance? Please contact us! If you encounter any di culty with this product please email us service@nuvatek.com or call us, Monday to Friday 9:00 AM to 5:00 PM EST 1-888-840-9999 or 514-631-7799 Our representatives are ready to help you with any questions.
1 Year Limited Warranty WARRANTY ELECTRIC FIREPLACE LIMITED WARRANTY: This manufacturer’s product warranty extends to the original con- sumer purchaser of the product. Neither the retailer nor any other company involved in the sale or promotion of this product is a co-warrantor of this manufacturer warranty. WARRANTY DURATION: All materials and workmanship are warranted to the original consumer purchaser for a period of one (1) year from the original purchase date.
Important Safety Instructions · When using this electrical fireplace, basic precautions should be taken to reduce the risk of fire, electric shock and injury to person, including the following: · This fireplace must be used on an AC supply only and the voltage marked on the fireplace’s rating label must correspond to the supply voltage.
Getting Started · Remove the fireplace from the box. · Remove all the packaging and place it inside the box and either store or dispose of safely. Package Contents · Electric Fireplace. · Wall Mounting bracket. · Pebble Pack · Screws and Wall plugs. ·...
Installation · Do not connect the fireplace to the power supply until properly fixed to the wall and the instructions read fully. · Always ensure the area to be drilled is free from hidden electrical wires, water and gas pipes. ·...
Page 7
! Mark the bottom holes position-see Fig.3, remove the fireplace ensuring that the bottom fixing bracket is rotated up. ! Drill and fit wall plug. ! Refit the fireplace on the wall fixing bracket and rotate the bottom fixing bracket down again and use the screw provided to permanently fix the fireplace in place.
Remote Operation · The standby switch located at the top right hand side of the fireplace must be switch on first. · Insert 2 x 1.5V AAA type new batteries (not included) into the battery compartment of Remote Control, ensure they are inserted with the correct polarity. Close the battery compartment cover securely.
Page 9
Replacing the Lamp · This fireplace consists 3 bulbs that illuminate flame effect. Light bulbs need to be replaced if you notice a dark section of the flame or when the flames lose clarity. · Warning-Always disconnect from the power port before removing bulbs, to reduce the risk of fire, electric shock or damage to property.
Page 10
· Remove the light screen fixed with two screws-see Fig.7. · Remove the defective bulb by pulling it out of the holder. · Replace with a 40W G9 halogen bulb. Do not touch the bulb with bare hands, and bulb is replaced appropriately.
Need help?
Do you have a question about the REFLECTIONS and is the answer not in the manual?
Questions and answers