Table of Contents
Advertisement
Using the TV's Features
Setting the Language
This TV can display the channel number, on screen displays and picture adjustments on the screen in English, Spanish or French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the lan-
guage you prefer fi rst, then proceed with the other menu options.
1. Press the MENU button.
MENU
CH SETUP
2. Press the SET + or – button to select the LANGUAGE mode, then press the ENTER button.
PICTURE
LANGUAGE
3. Press the SET + or – button until the " " indicator points to the desired language: English (ENGLISH),
V-CHIP SET
Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button.
(+ / – / ENTER / MENU)
4. Press the MENU button again.
Note: If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption
LANGUAGE / IDIOMA / LANGUE
text will not be affected by the language selection.
ENGLISH
ESPAÑOL
FRANCAIS
( + / – / ENTER / MENU)
TV Operation
1. To turn on the TV, press the POWER button.
2. The VOLUME can be adjusted to a desired level by pressing the VOL (VOLUME)
The sound level will be indicated on the TV screen by green bars and a number. As the sound level increases, so do the number of bars
and the number on the screen. The same is true for decreasing the level.
3. Set the TV/CATV menu option to the appropriate position. When shipped from the factory, this menu option is in the CATV setting.
See "Setting Channels".
TV - VHF/UHF channels
CATV - CABLE TV channels
4.
CH (CHANNEL)
/
next channel set into memory. Press and hold the button down to change channels more quickly.
For proper operation, before selecting channels, they should be set into the TV's memory. See "Setting Channels".
0-9 (Direct Channel Selection Buttons) Press these buttons to select a channel. The channel number will appear on the upper right
corner of the TV screen. If an invalid channel number is selected, the display will revert to the previous channel.
TV mode direct channel selection When the TV/CATV menu option is in the TV position, all channels can be instantly selected by
using two buttons (For example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a
few seconds). For channels 10 and above, press the 2 digits in order.
CATV mode direct channel selection When the TV/CATV menu option is in the CATV position, channels can be selected as fol-
lows:
1-9
Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002".
10-12
Press "0", then remaining 2 digits. Example, to select channel 12, press "012".
13-99
Press the 2 digits in order. Example, to select channel 36, press "36".
100-125
Press the 3 digits in order. Example, to select channel 120, press "120".
Note: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes.
Closed Captioning
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the
screen for hearing impaired viewers or it will translate and display text in another language.
TO VIEW CLOSED CAPTIONS
Press the TV/CAP/TEXT button on the remote control to switch between normal TV and the two Closed Caption Modes (Captions and
1/2 of Full Screen Text).
Captions: This Closed Caption Mode will display text on the screen in English or another language (depending on the setting of the
Closed Captions CH. 1/2 button). Generally, Closed Captions in English are transmitted on Captions Channel 1 and Closed Captions in
other languages are transmitted on Captions Channel 2.
8
Buttons Press and release the CH (CHANNEL)
or
button.
or
button. The channel automatically stops at the
Advertisement
Table of Contents
