Table of Contents
Advertisement
Onboard 1394 [Enabled]
Enable or Disable Onboard 1394.
Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
[Auto]
Parallel Port Address [378/IRQ7]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Parallel Port Mode [EPP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [EPP] [ECP] [Bi-Directional]
The ECP Mode Use DMA item becomes user-configurable when the Parallel
Port Mode item is set to [ECP] or [Bi-Directional]
ECP Mode Use DMA [3]
Allows selection of ECP Mode. Configuration options: [1] [3]
4.4.5
SLI Configuration
Advanced
AI-Selector
F1:Help
ESC: Exit
AI-Selector[Auto]
Allows you to select the Scalable Link Interface mode. When set to [Auto], BIOS
detects the setting of SLI EZ Selector Card. Set this item to [Single Video Card]
when using single PCI-E graphics card.
Configuration: [Auto] [Single Video Card] [Dual Video Card]
4-28
Phoenix-AwardBIOS CMOS Setup Utility
SLI Configuration
↑↓ : Select Item
→←: Select Menu
[Auto]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Allow you to select
the Scalable Link
Interface mode. When
set to Auto, BIOS
detects the setting of
SLI EZ Selector Card.
Set to Normal when
using single PCI-E
graphics card plugged.
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
