* We recommend that you unplug the printer from the power outlet if no use it for a long period 2. Applications: * POS system Receipts * EFT POS system Receipts * Gym, post, hospital, civil aviation system Receipts * Inquiry, Service system Receipts...
4. Main Features: * Command protocal is based on ESC/POS standard. * Low-noise thermal printing. * Various Layouts are possible by using page mode. * Repeated operation and copy printing are possible. * Character font size optional. * Easy paper-roll installation.
6. Printer Connection a. Plug the DC cord connector into the printer's power connector. b. Plug the data cable connector into the printer's interface connector. c. Plug the drawer cable into the drawer kick-out connector on the back of the printer next to the interface connector.
Page 5
8. Setting the Printing Mode (DIP switches) The DIP switches are used to set the printer to perform various functions, such as cutter mode, character set, speed, beeper, print density and etc. DIP SWITCH SETTINGS...
Page 12
WARNING: All rights reserved. No part of this publication may be reproduced, stored in a retrieval, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission. The company reverses the rights of modifications of manufacture technology, assembly, software and hardware without notice.
Need help?
Do you have a question about the M200III and is the answer not in the manual?
Questions and answers