Advertisement
F INSTRUCTIONS FOR USE
1
Wash and condition your hair as normal.
2
Squeeze out excess moisture with a towel and comb through.
, Hairsprays contain flammable material – do not use while using this product.
3
Select your attachment before you turn on the appliance.
4
Attachments can be connected to the power handle by simply aligning the
arrows (q) on the attachment locking ring with channels on around the
edge of the power handle and pushing together. Click the attachment
locking ring to the left in the direction of the lock arrow (p L) to lock into
place.
5
Plug the product into the mains power supply.
6
Dry length and roots partially prior to styling.
, Tip: for best results aim for 80% dry hair.
7
Section the hair prior to styling. Style the lower layers first.
8
The 50mm bristle brush adds volume and fullness and is ideal for mid to
longer hair.
9
The 40mm bristle brush adds root volume and creates loose curls. Ideal for
shorter, fine hair.
10 To use the rotating function, turn the switch to the right for the brush to
rotate clockwise.
11 Wrap the bottom of the hair around the brush.
12 Turn the rotating switch left to wind hair around the brush, stopping at the
roots.
13 Turn the rotating switch to the opposite direction to unwind.
14 Let the attachments cool before removing.
15 To remove attachments, click the attachment locking ring to the right in the
direction of the unlock arrow (q L) and pull the attachment away from the
main housing.
16 Add volume to the roots to finish the look.
17 After use, turn the appliance off and unplug.
C CLEANING AND MAINTENANCE
•
Unplug the appliance and allow to cool.
•
To maintain peak product performance and to prolong motor life, it is
important to regularly remove any dust and dirt from the inlet grill and
clean with a soft brush.
•
Wipe all the surfaces with a damp cloth.
•
Don't use harsh or abrasive cleaning agents or solvents.
4
Advertisement
