Section 6 − Operation; Power Switch; Left/Right Select Switch; Jog/Purge - Miller Electric D-75D Owner's Manual

6-1. Power Switch

6-2. Left/Right Select Switch

1

6-3. Jog/Purge

3
Pressing the Jog/Purge switch allows the op-
erator to jog wire without energizing the weld
power or gas valve circuit.
Jog speed can be adjusted with the Wire
SECTION 6 − OPERATION
1
2
1
Speed control when the unit is jogging wire.
If equipped with meters, the unit displays jog
speed while the unit is being jogged.
Pressing the Jog/Purge button also allows
1 Power Switch
Ref. 804 567-B
1 Left/Right Select Switch
Pressing the Left/Right Select
switch allows the operator to
choose which side of the unit's con-
trols will operate.
1 Jog/Purge Push Buttons
2 Wire Speed Controls
3 Gun Trigger Receptacles
Ref. 804 568-B
the operator to purge gas lines before weld-
ing and to preset gas pressure at the regula-
tor.
OM-228 322 Page 21
Ref. 804 568-B