Adding Equipment To Your; Airbag-Equipped Vehicle - Buick Lucerne 2007 Owner's Manual

Adding Equipment to Your

Airbag-Equipped Vehicle

Q:
Is there anything I might add to the front
or sides of the vehicle that could keep the
airbags from working properly?
A:
Yes. If you add things that change your
vehicle's frame, bumper system, height,
front end or side sheet metal, they may keep
the airbag system from working properly. Also,
the airbag system may not work properly if you
relocate any of the airbag sensors. If you have
any questions about this, you should contact
Customer Assistance before you modify your
vehicle. The phone numbers and addresses for
Customer Assistance are in Step Two of the
Customer Satisfaction Procedure in this
manual. See Customer Satisfaction Procedure
on page 460.
Q:
Because I have a disability, I have to get
my vehicle modified. How can I find out
whether this will affect my airbag system?
A:
Changing or moving any parts of the front
seats, safety belts, the airbag sensing and
diagnostic module, steering wheel, instrument
panel, ceiling headliner, ceiling and pillar
garnish trim, roof-mounted airbag modules,
or airbag wiring can affect the operation of
the airbag system. If you have questions,
call Customer Assistance. The phone numbers
and addresses for Customer Assistance are
in Step Two of the Customer Satisfaction
Procedure in this manual. See Customer
Satisfaction Procedure on page 460.
87