Virtual Private Networks (Vpn); Prepare Your Phone For Vpn Connection; Set Up Secure Credential Storage - LG G2 User Manual

Your phone is connected to the high-speed 4G LTE network. When the signal bands are
animated, your phone is scanning and connecting. During data transfer, the animated icon is not
used (for example, when you are opening a web page). When the signal bands are gray, your
phone is connected to the network, signal is weak.
When both the bands and the 4G icon are gray, there is no coverage and you are disconnected
from the 4G network.
Your phone is connected to the high-speed network(3G/1x). When the arrows are animated,
your phone is transferring data. When the arrows are gray, your phone is connected to the
network but is not currently transferring data. In either state, you can receive incoming calls.
If you do not see an indicator, your phone does not have a current data connection. To launch a
connection, see Launch a Web

Virtual Private Networks (VPN)

From your phone, you can add, set up, and manage virtual private networks (VPNs) that allow
you to connect and access resources inside a secured local network, such as your corporate
network.

Prepare Your Phone for VPN Connection

Depending on the type of VPN you are using at work, you may be required to enter your login
credentials or install security certificates before you can connect to your company's local
network. You can get this information from your network administrator. Before you can initiate a
VPN connection, your phone must first establish a Wi-Fi or data connection. For information
about setting up and using these connections on your phone, see
and Turn Wi-Fi On and Connect to a

Set Up Secure Credential Storage

If your network administrator instructs you to download and install security certificates, follow the
instructions below.
1. Tap >
2. Tap Install from storage for desired certificates.
You can then download and install the certificates needed to access your local network. Your
network administrator can tell you how to do this.
Web and Data
Connection.
Network.
> System settings > Security.
Launch a Web Connection
105