Section 5 − Operation; Operational Terms; Power Switch; Left/Right Select Switch - Miller Electric and DS-74DX16 Owner's Manual

5-1. Operational Terms

The following is a list of terms and their definitions as they apply to this wire feeder:
General Terms:
Cold Wire Jog
Sequence
Weld Program

5-2. Power Switch

5-3. Left/Right Select Switch

1
OM-1500-14 Page 20
SECTION 5 − OPERATION
Feeding wire without contactor or gas valve being energized.
A portion of the weld program, such as preflow, run-in, start, weld, crater, burnback, and postflow.
A group of sequences that make up a weld cycle.
1
1 Power Switch
803 193
1 Left/Right Select Switch
Pressing the Left/Right Select
switch allows the operator to
choose which side of the units' con-
trols will operate.
.
Engaging the Left or Right
Gun Trigger also allows the
operator to enable the con-
trols on that side of the unit.
803 194