SAFETY INSTRUCTION A L E R T S Y M B O L This is the “Safety Alert Symbol.” This symbol is used to call your attention to items or operations that could be dangerous to you or other persons using this equipment. Read these messages and follow these instructions carefully.
Page 4
panel to turn brown, in turn causing the contrast to drop and other forms of deterioration to develop in the display quality. (4-4)Moisture inside the monitor due to condensation, etc. may cause unevenness in the colors. (4-5)Directly tapping the surface or bumping it into objects may crack the panel,etc. (4-6) Do not attempt to disassemble the panel since leaking liquid crystal may make contact with your skin, which is hazardous.
Specification 1.General This product is the nine inches LCD viewfinder for the Hitachi Multi standard camera series. 2.Major specification Correspondence HDTV camera formats : 1080i (59.94/50),720P(59.94/50) LCD size: 9 inch 16:9 format Effective display area: 194mm x 116mm Maximum display pixel number: 1280(H) x 768(V) Picture area pixel number: 1280(H) x 720(V)
⑥ ① ⑦ ② ⑧ ⑨ ③ ④ Fig. 2.1 Front view of the VF-L90HD List 2.1 NAME of the front function NAME FUNCTION Power On and OFF. ① POWER SWITCH POWER ON:Lights the Green LED/POWER OFF:Off the LED ②...
Page 7
2.2 Rear of the VF-L90HD ② ① Fig. 2.2 Rear view of the VF-L90HD. List 2.2 Name of the rear function Y VIDEO NAME FUNCTION SHIELD ① Input Signal of the connector. Pb VIDEO Connector Power (DC +12V) / GND...
3.1 How to connect. The VF connecting connector (HR10A-13R-20PC) has to connect after confirmed the power switch off the camera to number① of the rear VF-L90HD. 3.2 Operation method Confirm the connection first then turn the VF power ON after the camera main switch turned on.
Page 9
3.3.5 Each adjustment VR ・ Adjustment of the each BRIGHT、CONTRAST、PEAK、CHROMA functions are turned by the each function VR. (The PEAK adjustment can be selected from the CAMERA CONTROL or Local CONTROLL by DIP switch in the VF board.) 3.4 Display the LCD Display R TALLY、G TALLY ,EXT and WF in the LCD.