Sharp Aquos 40LE653U Operation Manual page 15

>>
Watching TV
<<
Initial Installation (Continue)
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
8 When "Air" is selected in Antenna setting:
Press / to select "Start", and then press ENTER.
When "Cable" is selected in Antenna setting:
Press / to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER.
The Channel search will start automatically.
To exit the Channel search screen, select "Cancel", and
then press ENTER.
ENG 2-5
Smart TV
When you connect to the Internet on the TV, select the
desired connection method and follow the instructions
shown on the display.
Wireless LAN connection is possible only when the WPS
(push button) method is used. If any other method is
used, make settings by Smart TV > Internet Setup.
(See pages 7-2 to 7-4.)
9 Press / to select "Yes", and then press ENTER.
10 Press / to select "Wired" or "Wireless", and then
press ENTER.