Advertisement
Remove the battery cover on the
controller. Place 4 x AA batteries into
the battery compartment, noting the
correct polarities.
Replace the battery cover.
As shown to right, place the cabin cover over the hull and
buckle downward. The cabin cover will automatically stick
to the magnet core of the hull.
The hatch cover should now be sealed.
Move the switch to the ON position before turning on the
controller. Keep your hands away from the propellers and
make sure there are no objects around the propellers.
During use, please extract the antenna on the
remote controller to its fullest extent. Put the
boat into the water and pull the throttle lever
back or push it forward. The propellers will be
rotating and the boat will be racing backwards
and forwards.
While using the throttle, you can rotate the
left/right steering wheel to turn the boat in the
water.
When there is insufficient power, the power
indicator will go dark and you will need to replace
with a new battery.
Place the rechargeable battery pack in
to the bracket at the rear area of the
boat hatch and stick it in with the
magic sticker tightly.
Ensure it is secure.
Connect the socket of the
rechargeable battery pack as shown
above.
Advertisement
