1. Manuals
  2. Brands
  3. TOM Manuals
  4. DVR
  5. Ultra XQ-U400H
  6. Operation manual

TOM Ultra XQ-U400H Operation Manual

Xqh-ultra series
Hide thumbs
Table of Contents

Advertisement

Quick Links

DIGITAL VIDEO RECORDER
DIGITAL VIDEO RECORDER
OPERATION MANUAL (REV 1.0)
XQH - Ultra
Series

Advertisement

Table of Contents
loading

Summary of Contents for TOM Ultra XQ-U400H

  • Page 1 DIGITAL VIDEO RECORDER DIGITAL VIDEO RECORDER OPERATION MANUAL (REV 1.0) XQH - Ultra Series...
  • Page 2 Safety precautions Failure to follow these instructions could result in serious personal injury or death. Failure to follow these instructions could result in personal injury or property damage. Notifies user of references to use conveniently. Install this equipment avoiding a direct ray of light, heats and moistures. -Doing not, can result in lowering efficiency, electric shock or fire.
  • Page 3 Contents Open the box at the clean and even place. And read operation manual thoroughly before you install. DVR Mainframe Remote Controller USB Mouse (option) DC Power Adapter Operation Manual Power Cord Set Software CD Check the items supplied with your DVR system Refer to the picture above Check the items supplied with your DVR system.

  • Page 4: Table Of Contents

    Index Chapter I. System overview System Specification ------------------------------------------------------------------------ 7 System Characteristics ---------------------------------------------------------------------- 8 Chapter II. H/W description System Appearance ------------------------------------------------------------------------ 10 DVR Rear Panel --------------------------------------------------------------------------- 11, 12 System Rear Connection detail ------------------------------------------------------- 13, 14 System Front Description ----------------------------------------------------------------- 15 Remote Control Description ------------------------------------------------------------------- 16 Installation Guide for HDD disk --------------------------------------------------------------- 17 System on / shutdown -------------------------------------------------------------------------- 18 Chapter III Monitoring Screen...
  • Page 5 Index Chapter V. Search Search screen ------------------------------------------------------------------------------------- 54 Menu – Display / Calendar search ---------------------------------------------------------- 55 Menu – Section / Event search --------------------------------------------------------------- 56 Menu Section / Event search Menu – Date / Time search / First, Last, Bookmark ----------------------------------- 57 Menu –...
  • Page 6 Chapter-I. System Overview...

  • Page 7: System Specification

    Chapter I System Specification XQ-U400H XQ-U900H XQ-U1600H Video IN / Loop Out 16/0 Video Display 1, 4 1, 4, 9 1, 4, 9, 16 1CH Composite Monitor Out VGA Out Audio In/Out 4 in / 1 out Audio Compression G.723 Display Resolution 720x480 Recording Resolution...

  • Page 8: System Characteristics

    Chapter I System Characteristics High quality video compression H.264 Codec Powerful 240fps Recording Performance – CIF (360x240) Base Max. 1 HDD built-in ( can support up to 1.5TB ) / SATA Type HDD support Frame rates, resolution and image quality adjustable for each camera separately User Friendly Control by USB Mouse, Remote Controller and Keyboard Maximized Security Efficiency by Live Image Edition, Digital Zoom(2x) Optimal Recording Mode with Event, Enforcement and Schedule Recording...
  • Page 9 Chapter-II. H/W Description...
  • Page 10 Chapter II System appearance 350mm 1) Front View 196.3mm 2) Side View 350mm 3) Top View...

  • Page 11: Dvr Rear Panel

    Chapter II DVR Rear Panel 1) 4CH Rear Panel Power Alarm In/Out, Video Out ON/OFF RS485 Factory Default NTSC/PAL VGA Port Audio In Video In Ground Switch Power In USB/Network Audio Out DC 12V 3A DC 12V 3A Port Port 2) 9CH Rear Panel Power Alarm In/Out,...
  • Page 12 Chapter II 3) 16CH Rear Panel Power Alarm In/Out, Video Out ON/OFF RS485 Factory Default NTSC/PAL VGA Port Audio In Video in Ground Switch 16CH Power In USB/Network Audio Out DC 12V 3A Port...

  • Page 13: System Rear Connection Detail

    Chapter II System rear connection detail 1) Video Source Connection It connects video sources (camera image) to BNC connector via cable. 2) Monitor Connection CVBS OUT : It connects normal CCTV CRT monitor. VGA : It connects PC monitor or LCD monitor (not supporting DVI) 3) Audio Connection It connects audio source (mic) to audio...
  • Page 14 Chapter II 5) NTSC/PAL Shift Switch NTSC/PAL switch is used to adapt DVR to the User environment . Make sure to switch the shift while DVR’s power is turned off. After switching to the desired format turn on DVR again. 6) Alarm In (Sensor)/Out Connection and RS 485 connection * Alarm Input 1~4CH DVR is set to react to the Event through the External Device...

  • Page 15: System Front Description

    Chapter II System Front Description Power Recording Network USB 2.0 Remote Controller IR Sensor...
  • Page 16 Chapter II Remote controller Description (Optional) FUNCTION FUNCTION ICON ICON HOT KEY HOT KEY POWER ON/OFF PLAYBACK & PAUSE LATEST SEARCH ||▶ STOP TO LIVE ■ REWIND FIRST SEARCH ◀◀ FAST FORWORD LAST SEARCH ▶▶ STEP REVERSE CALENDAR SEARCH ◀| STEP FORWORD EVENT SEARCH |▶...

  • Page 17: Installation Guide For Hdd Disk

    Chapter II Installation Guide for HDD disk Description HDD for system needs to be installed as “SATA1” SATA 1 SATA 2 ( Product Inside ) Please fix HDD with 4pcs of screws. ( Product bottom side )

  • Page 18: Network

    Chapter II System On • Put the power to the DVR. • Turn on the power switch at the rear power button . it h t th b tt • It takes about 2minutes to boot (It may take more when network cable isn’t connected) System Shutdown •Select [SETUP >...
  • Page 19 Chapter-III. Monitoring Screen...
  • Page 20 Chapter III Monitoring Screen Monitoring screen : it monitors each channel. <Screen Indication> Left Up : Camera Name P – Pan/tilt A – Audio Right Up : Record mode (Blue-Normal, Red-Event) Motion status Central : Video Loss, Hidden Camera Status Bar : DVR status Indication (Backup HDD usage Current Time SEQUENCE FREEZE Login info etc) (Backup, HDD usage, Current Time, SEQUENCE, FREEZE, Login info.
  • Page 21 Chapter III Screen Split Press DISPLAY button or mouse menu: changed on 1 -> 4 -> 9 -> 16 by turn Direct Channel 1) Press channel No. on the remote control or front panel. 2) Click the screen to watch specific channel using mouse. ** Pressing No.1 button responds a bit delayed to wait a possible signal input of No.10~16 (approx 2.5 seconds) LOG IN...
  • Page 22 Chapter III Menu Bar * Click MENU button or right button of mouse DISPLAY 1, 4, 9, 16 : Split screen change (the same as DISPLAY button) MISCELLANUEOUS SEQUENCE Sequence camera group regularly FREEZE Pause the screen ZOOM 1 Full Live screen available only. Select Zoom : Press zoom button and locate the box to magnify using direction keys Move Zoom : It can be moved using direction key after press Enter.
  • Page 23 Chapter III Pan Tilt/Zoom/Focus/Iris Preset setting and moving functions are supported. Each function can be different from each PTZ protocol. ALARM Control Alarm output function.
  • Page 24 Chapter III STATUS RECORD Displays current recording status EVENT Displays current event information (motion/alarm). DISK Displays current Disk information Bad Block Status NETWORK Displays current network information. Also displays current connected client information.
  • Page 25 Chapter III PANIC RECORD Set recording mode in an emergency situation. Press SETUP>RECORD> EVENT RECORD>FPS/QUALITY SETUP Select to enter into SETUP menu CAMERA COLOR Changes camera screen color Changes OSD (On Screen Display)’s position. SEARCH Select to enter into SEARCH menu...

  • Page 26: Device

    Chapter III BACKUP Select to backup recorded data. 1) Backup Device Search 4) Warning when data size is over 2) Select data to backup 5) Make Image after pressing OK. 3) Calculate data size 3) Calculate data size During backup, any function won’t be working due to system’s stability.
  • Page 27 Chapter III MUTE Sound off LOGOUT Press SETUP>SYSTEM>USER...
  • Page 28 Chapter-IV. SETUP...
  • Page 29 Chapter IV SETUP SCREEN SYSTEM Set up various system related items. INFORMATION DATE/TIME DISK USER LOGOUT SYSTEM SHUTDOWN...

  • Page 30: Record

    Chapter IV INFORMATION INFORMATION DEVICE NAME: User can change the DVR name on his own. LANGUAGE : Select language. VERSION : Shows S/W version info. (With UPGRADE button, you can upgrade the newest S/W version) ) Can’t upgrade when DVR’s power is on . Contact manufacturer or distributors for upgraded version.
  • Page 31 Chapter IV DATE/TIME DATE/TIME Set date, time & Time zone of System. When you use it for the first time Set these items in advance . Check “NO” of enable in the TIME SYNC menu, user can change DATE/TIME TIME SYN Synchronize time with internet time server.
  • Page 32 Chapter IV DISK DISK TABLE Shows current disk information connected to system. IMPORTED : DISK installed RECORD : RECORD possible SYSTEM : DISK allotted for SYSTEM TOTAL DISK FORMAT Format all connected HDD disks. (When you select info column of connected DISK separately, You can format DISK one by one.
  • Page 33 Chapter IV USER USER Shows currently registered user lists. User accounts can be added or deleted. add account with this button. X Delete account with this button. USER ADD Possible to add user account according to authority. CONFIRM LOGIN CONFIRM LOGIN When YES selected, LOGIN needs to be confirmed every time to enter into setup / system menu.
  • Page 34 Chapter IV Shows all log infos on SYSTEM and other events CLEAR : Remove all log info. UP/DOWN button : Move to next/previous log info page by page . Move to first part of LOG info. Move to Last part of LOG info. LOGOUT LOGOUT function when exiting set up SYSTEM SHUTDOWN...
  • Page 35 Chapter IV NETWORK NETWORK Set up various NETWORK items DDNS E-MAIL CALLBACK...
  • Page 36 Chapter IV MAX CONNECTION Shows maximum numbers of Connectable users. (Up to 4) STATIC TYPE Select in case of STATIC IP. All setting values of IP, GATEWAY, NETMASK Need to be set manually. DHCP TYPE Select during automatic DHCP IP. User set DNS only.
  • Page 37 Chapter IV DDNS(DYNAMIC DNS) ENABLE Select if you want DDNS This is under the situation of Dynamic IP Network. SERVER Select DDNS server EZDDNS : Specialized DDNS server operated by Ma EZDDNS : Specialized DDNS server operated by Ma nufacturer www.ezddns.com DYNDNS: DDNS common server In order to use DDNS service...
  • Page 38 Chapter IV E-MAIL ENABLE Select when you need E-MAIL transmission. ALL event information is sent to admin’s E-mails. SMTP SERVER SMTP SERVER Write the MAIL sending SMTP server name. SENDER Write the mail account of sender. AUTH ENABLE Check when you need account authority authority.
  • Page 39 Chapter IV CALLBACK ENABLE Check to use CALLBACK function . All event or specific information are sent to “Agent” Program which is installed on P.C CALLBACK ADD CALLBACK ADD Register IP address of P.C for callback function...
  • Page 40 Chapter IV DEVICE DEVICE These are item lists for the control of CAMERA, ALARM . CAMERA ALARM DISPLAY MAIN MONITOR MISCELLANEOUS...
  • Page 41 Chapter IV CAMERA ENABLE Check if you want to use current camera TITLE Can change the camera name. HIDDEN Doesn’t show the screen on live mode Even though it records and runs normally. PTZ ENABLE PTZ ENABLE Check if you want to use PTZ function. PTZ PROTOCOL Select PTZ PROTOCOL.
  • Page 42 Chapter IV ALARM ENABLE Check if you use specific ALARM. TITLE Changes connected ALARM names. ALARM TYPE Select specific ALARM TYPE. (NORMAL OPEN, NORMAL CLOSE) DISPLAY DISPLAY Shows all OSD display details. CAMERA INFOMATION Selects the display of CAMERA NO, TITLE EVENT INFOMATION Select OSD display for the EVENT.
  • Page 43 Chapter IV MAIN MONITOR Set up SEQUENCE, EVENT POPUP of main monitor. SEQUENCE Set up the screen switching times. EVENT POPUP Check if you want event pop up function. Set up the VGA Resolution.
  • Page 44 Chapter IV MISCELLANEOUS Control of remote controller/key related functions. REMOTE CONTROLLER ID Designate remote control ID. It is useful when many DVRs installed at the same place . KEY TONE ENABLE Select button volume on the front panel. External Controller Use Choose whether External Controller use or not.
  • Page 45 Chapter IV RECORD RECORD These are control lists of recording related functions. RECORD POLICY RECORD...
  • Page 46 Chapter IV Record Policy choose record policy, there are 2 options on data recording - Once : Record one time without overwriting. - Overwrite : Overwrite recording data on installed Record data Retention Select record data retention date from ‘Disable’ to ‘365’...
  • Page 47 Chapter IV RECORD Set up specific record type per each camera. RESOLUTION Set up resolution. -360*240(CIF) -720*240(HALF-D1) -720*480(D1) RECORD MODE Set up record type. NORMAL+EVENT is focused record mode. NORMAL/EVENT RECORD FPS Set up how many frames to record. NORMAL/EVENT RECORD QUALITY Set up record quality.
  • Page 48 Chapter IV EVENT EVENT This is for the control of all event items such as MOTION, SENSOR. MOTION SENSOR VIDEO LOSS SYSTEM...
  • Page 49 Chapter IV MOTION SETUP Click mouse right or MENU KEY button Set up the MOTION area & sensor. to see motion area window RECORD Set pre& post record mode. When record frames are less, PRE/POST RECORD need to be set a lot more for correct record search.
  • Page 50 Chapter IV SENSOR SETUP S t th SENSOR Set the SENSOR name & TYPE. & TYPE NORMAL OPEN : Normally it opens and sends signals when detects sensors. NORMAL CLOSE : Normally it closes, and it sends SIGNAL when detects sensors. RECORD Set Connecting camera, Pre, post record.
  • Page 51 Chapter IV VIDEO LOSS VIDEO LOSS can be an event type and can set camera record and action. SETUP Select whether you want VIDEO LOSS Function or not. RECORD Set connecting camera Pre& post record. When record frames are less, PRE/POST RECORD need to be set a lot more for correct record search.
  • Page 52 Chapter IV SYSTEM Sets how to operate event related with DISK mainly. DISK FULL Sets when HDD is full of record. DISK ERROR Sets when there is an error on HDD. S.M.A.R.T Enables the system to prevent possible malfunction of HDD by interfacing between system and HDD.
  • Page 53 Chapter-V. SEARCH...
  • Page 54 Chapter V SEARCH Playback Screen : Record Playback Playback Time : Playback Time Display Display Status Playback Icon Pause (Ⅱ) Playback (▶) Multiple Playback(▶ ▶, ▶ ▶ ▶, ▶ ▶ ▶ ▶) It randomly shows the first searched record file when it goes to SEARCH MODE. It randomly shows the first searched record file when it goes to SEARCH MODE.
  • Page 55 Chapter V SEARCH MENU DISPLAY Select screen division mode. (1,4 spirit) CALENDAR SEARCH Select date , hour, minutes, seconds in turn on calendar search. Select date , hour, minutes, seconds in turn on calendar search. When you click MINUTE, you can find specific record status as right below.
  • Page 56 Chapter V Section is Generated and maintained recording data that occurs duplicating data returning previous time by any cause during DVR operating Time progress Section#1: Sectoin#2: EVENT SEARCH It shows all EVENT record list. If you click related EVENT, It plays that event promptly. It may not be the same channel image as shown on EVENT LIST because it shows the first display image recorded at that time zone.
  • Page 57 Chapter V DATE/TIME SEARCH Search data by Date/Time . Search data by Date/Time . You can search the event promptly When you know the exact event time. FIRST Move to first part of recorded DATA. LAST Move to last part of recorded DATA. BOOKMARK Sets automatically starting time during back up.
  • Page 58 Chapter V Play Mode Expansion Expand Playback Mode. Low speed Play mode is activated when use this Function. If you don’t want to use Low-speed Play, uncheck this function. How to use “Low-speed Play Mode” Choose “FF” -> Low-speed 3 steps + speed rate 3 steps d 3 t t 3 t Choose “REW”...
  • Page 59 Chapter V BACKUP DEVICE Search backup device (Select when you play the backup data ) Search backup device (Select when you play the backup data.) If there are various back up devices , you can select a specific one . Search Tool-Bar Operating by mouse, it can be shown tool bar for easy playback.
  • Page 60 Chapter-VI. Client program...
  • Page 61 Chapter VI REMOTE <REMOTE PROGRAM IS?> With connected to DVR remotely, it is to perform Remote Monitoring, Remote Search, Remote Backup etc. (Please install remote program from the program Environment conditions for Remote Program 1. INTEL P-4 2. 256M or higher main memory(512M recommend) 3.
  • Page 62 Chapter VI Connection information and Button Shows DVR’s name IP address and connection status Shows DVR s name, IP address and connection status. DVR connection button. : Enter IP address and user authentication : Enter IP address and user authentication to connect DVR Modify : Modify IP address and user authentication...
  • Page 63 Chapter VI <What is IP address?> A set of address system that is used to find out destination in network access via Internet or LAN. IP address is divided into REAL IP and VIRTUAL IP, and REAL IP must be sent on DVR for the access from remote site via internet.
  • Page 64 Chapter VI Language : To choose program’s language To choose program s language. Video Display : YUV mode : According to your PC graphic card ability, the support can be decided. This mode shows faster, clear ability of image transmission than RGB mode.
  • Page 65 Chapter VI <Recording Status> Shows and check the recording status Shows and check the recording status <Event Status> <Event Status> Shows DVR’s event status and you can check the status of Motion, Sensor, Video Loss at real time. <Alarm Control> You can On/Off the DVR’s alarm if you press O /Off ’...
  • Page 66 Chapter VI Remote Set Up <Camera> No : Item to select camera No To set up all the camera equally, Choose “select all” Enable : Selection item to use camera, Removing the check stops using that channel. Title : Item to revise/type the camera name. Security : When checked, It displays ‘Hidden’...
  • Page 67 Chapter VI Remote Setup <Alarm> No : Item to select Alarm No. To set up all the camera equally, Choose “select all” Enable : Item to select to use Alarm, Removing the check stops using that channel. Title : Item to type Alarm’s name. Type : Item to select Alarm’s type.
  • Page 68 Chapter VI Remote Setup <Main Monitor> Sequence Dwell : Time setting for “screen change” Popup Event : You can choose whether you use “Popup Event” or not.
  • Page 69 Chapter VI Remote Set Up <Record> No : Item to select Camera No. To set up all the camera equally, Choose “select all” Resolution : Item to change the resolution. - NTSC : 720X480, 720X240, 360X240 - PAL : 720X576, 720X288, 360X288 Normal Record Frame :Item to select normal record frame.
  • Page 70 Chapter VI Remote Set Up <Record (Timetable)> 1. Select the Record Mode 2.Select Day/Time < Schedule of Record> It is the list of selection in which schedule to Schedule Indication by color use in operating the relevant camera channel. Normal(N) : (Blue) First select the item you need among Normal time, Event and Normal time + Event.
  • Page 71 Chapter VI Remote Set Up <Record Policy> Record Policy: Item to select record policy Overwrite : When HDD capacity is almost consumed, It erases old data and record new. Single Record : To stop recording on 100% of HDD capacity. Record Data Retention : Please choose “Record Data Retention “...
  • Page 72 Chapter VI Remote Set Up <Motion> Camera No : Item to select Camera No. To set up all the camera equally, Choose “select all” Enable : Selects to use motion sensor, Removing the check stops using that channel. Sensitivity : Adjusts the sensitivity in motion detection. There are 5 steps and as the number increase, it gets more sensitive.
  • Page 73 Chapter VI Remote Set Up <Motion (Link Record)> Link Camera : Selects which channel to record when motion is detected on the relevant channel. ※ Multiple selection possible Pre Record : Sets pre-event recording time. (Max 5 second) Post Record : Sets post-event recording time. (Max 60 second) Remote Set Up <Motion (Link Action)>...
  • Page 74 Chapter VI Remote Set Up <Sensor> Sensor No : Sets sensor No. To set up all the camera equally, Choose “select all” Enable : Selects to use sensor, Removing the check stop using relevant sensor. Title : Item to select sensor’s name. Type : Item to select sensor type.
  • Page 75 Chapter VI Remote Set Up <Sensor (Link Record)> Link Camera : Selects which channel to record when sensor is detected on the relevant channel. ※ Multiple selection possible Pre Record : Sets up pre recording time. (Max 5 second) Post Record : Sets up post recording time. (Max 60 second) Remote Set Up <Sensor (Link Action)>...
  • Page 76 Chapter VI Remote Set Up <Video Loss> Camera No : Item to select camera No. To set up all the camera equally, Choose “select all” Enable : Item to enable the Video Signal Loss function...
  • Page 77 Chapter VI Remote Set Up <Video Loss( Link Record)> Link Camera : Selects which channel to record when video loss is detected on the relevant channel. ※ Multiple selection possible Pre Record : Sets up pre recording time. (Max 5 second) Post Record : Sets up post recording time.
  • Page 78 Chapter VI Remote Set Up <System> DISK FULL : List for all installed HDD disks. Disk Full Notice Enable : Activate Disk Full Notice when installed disks are full. Remote Set Up <Disk Full (Link Action)> Popup Camera : Not available as of now Popup Time : Not available as of now Link Alarm :...
  • Page 79 Chapter VI Mail : When all installed HDD disks are full, the log is sent to the selected e-mail Call Back : When HDDs are full, the log is sent to the selected IP address. Log : Selects to save Log writing when installed HDDs are full. (It is not recorded on the system Log, but used for event search.) SMART Enable SMART : Select to use SMART feature.
  • Page 80 Chapter VI Remote Set Up <DDNS> DDNS : Select to enable DDNS function. Enables the network access from Dynamic IP environment. Server : Select Server for DDNS EZDDNS : DDNS server operated by the manufacturer (recommended) www.ezddns.com DYNDNS: DDNS public server Host name : The name used in the Dynamic IP environment instead of IP Address.
  • Page 81 Chapter VI Remote Set Up <E-Mail> E-mail : To be selected for activating E-mail notification function SMTP Server : To register the SMTP Server that manages the mail notification. ID/ Password : Enter the ID and Password ID/ Password : Enter the ID and Password. E-mail : Register the E-mail(s) authorized for the receipt of information.
  • Page 82 Chapter VI Remote Set Up <Callback> Callback : Select to activate CALLBACK function. Function that enables delivery of the various Events occurring in the System to the Agent Programs set in the PC. Add Callback: Select to register IP Address of computer that will use CALLBACK function. PORT : Adjusts DVR and PORT PORT : Adjusts DVR and PORT.
  • Page 83 Chapter VI Remote Set Up <LAN> LAN : LAN Setting. Maximum User Number : Indicates the maximum number of CLIENTS that can be connected. (Max. 7) Regardless of the number of Client connections only one Client will be able to connect to XQ Search.
  • Page 84 Chapter VI PLAY & PAUSE Starts or stops image transmission on the Remote Live screen. This starts automatically when search or set in the setup menu. Starts to play when pressed. Stops to play when pressed. AUDIO Transmission Controls Audio volume. ※Audio signal is sent on full screen mode only. Sound volume control gauge Mute Button : Stops audio transmission.
  • Page 85 Chapter VI Channel Button Moves to the channel selected and it has the same function as double click the left mouse button on the selected channel. Layout Modify Button Screen Division Button : Selects desirable screen division. Whole Screen : All buttons are hidden and the screen displays full. ※...

  • Page 86: Ptz Operation

    Chapter VI PTZ Operation A camera supporting PTZ can be used on Remote Viewer program. ※ Refer to PTZ support list Direction Button : Button to move top, bottom, left, right Channel Indication : Indicate current channel Speed Control Button : Button to control moving speed Image Control Button : Button to adjust Zoom, Focus, Iris...
  • Page 87 Chapter VI Remote Search Playback Display Camera Name Green Border Line : Display the selected camera. Recorded Date/Time SECTION Selects section Selects section Section is created when Date/Time is changed to former times. Former Date/Time will be kept in section 0. Newly set Date/Time will be kept in section 1……...
  • Page 88 Chapter VI Move & Event Search Move Button : Move to selected time Event Search Button : Popup the event search window Shows start and end time of recorded data. Moves to the time to search and press OK button. <Move Window>...
  • Page 89 Chapter VI Connection Information and Button Shows DVR’s name IP address and connection Shows DVR s name, IP address and connection status. Backup play button Connect/Disconnect Button : Button to connect to other DVR in the saved list When many DVRs are registered in the DVR list, each DVR can be remotely searched without closing The Remote Program.
  • Page 90 Chapter VI Screen Division Button Screen Division Button AUDIO Play Controls audio volume. ※Audio signal is sent only on one full screen. Sound volume control gauge Mute Button : Stops audio transmission Image Control Button Brightness Contrast Brightness adjustment button : Adjusts the brightness of playing images.
  • Page 91 Chapter VI Saving Button Back Up : Backup the searched image as Backup compressed image file compressed image file. Print Print : Image Save Print the searched images. AVI Save Image Save : Saves the searched images as Image File. (Save JPEG or BMP) AVI Save : Saves the searched images as AVI file.
  • Page 92 Chapter VI Preview : Preview of the images to print, which is printed with various information which is printed with various information written on the bottom of the image. <Preview Window> Image Format JPG format : Definition has a little loss due to loss compression method, but archiving size is small.
  • Page 93 Chapter VI Storage Information Selects camera No and start/end time to save save. Including : Selects audio to include. Back Up Patch : Selects the path to backup Total Capacity : Shows total capacity Shows total capacity Left Capacity : Shows remaining capacity <AVI Save Window>...
  • Page 94 Chapter VI Time Table Selects year/month/day and hour/minute to search the recorded data. Year/Month Select Button : Button to move previous and next month. Recorded Date (Blue) : Shows recorded date in blue. Current Date (Blue Round) : Shows current date in blue round. No Recorded Date (Black) : Shows no recorded data in black.

  • Page 95: Backup Playback

    Chapter VI Backup Playback Backup Playback Button : Click to back p pla back Click to backup playback Select the backup data to play. Backup playback can play a data of Image file. Windows Media Player can play a data of AVI image files .
  • Page 96 Chapter VI PLAYER Search screen Camera Name Green border line : Display the selected sp ay e se ec ed camera. Recorded Time/Date Starting/End Move to starting record data Move to end of record data Play Progress Bar...
  • Page 97 Chapter VI Play button Fast Forward Fast Rewind Stop Stop Play / Pause Sound volume Control Button ※Audio signal is sent only on one full screen. Sound volume control gauge Mute Button : Stops audio transmission Layout Button Layout button : Button to select screen division mode .
  • Page 98 Chapter VI Call function/Program Info Information : Shows program information. <Program Info Window> Call Function Button : Button to call in the back up file. Select the backup data to play Backup playback can play a data of Image file. Windows Media Player can play a data of AVI image files .

  • Page 99: Product Warranty

    Product Warranty Product Model Name Date of Serial NO. purchase Dealer Dealer Address Address Address Address Customer Address Address name Warranty period – 1 year As warranty period is counted from the date of purchase, it is recommended that you get the date of purchase to be written.

This manual is also suitable for:

Ultra xq-u900hUltra xq-u1600h

Table of Contents