Providence PEC-2 Owner's Manual page 15

■PEC-2 Options (Sold Separately)
●Pedal-board Mounting Hardware:
This special mounting hardware allows the PEC-2 to be mounted to a pedal board using wood screws. The pedal
board must be at least 7 millimeters thick to accommodate the screws.
●Rack-mount Tray:
This rack-mount tray allows the PEC-2 to me mounted in a 2U rack space.
●Link Cable:
Dedicated 7-pin cable for linking dual PEC-2 units.
■Other Options (Sold Separately)
●Powerbox Provolt9/PV-9：DC9V Output Connectors x 6
Double Filtering on each of the Provolt9 outputs ensures exceptionally clean power supply.
The Provolt9 Auto Voltage Controller ensures that approximately 9.6 volts DC (equivalent to a new alkaline battery) is
consistently supplied to booster, overdrive, distortion, and other low-power-consumption effect pedals that need to deliv-
er outstanding dynamic performance.
●Dimensions & Accessories
■
External Dimensions (not including jacks, switches): 446 (W) x 130 (D) x 35 (front edge)/50 (rear edge) (H) mm
■
Weight: approx. 1.9 kg
■
Supplied Accessories: PEC-2 AC Adaptor. Rubber feet x 4. PEC-2 Owner's Manual
15