Advertisement
DISC PLAYING
DISC PLAYING
DISC PLAYING
DISC PLAYING
DISC PLAYING
1. Open the CD tray with the " OPEN " button.
2. Insert the CD with the printed side facing upwards and push the disc gently until it clicks so that the
disc fits into the pivot.
3. Press the CD door to close.
On display windows
When you press "
", the display window shows:
Total number of tracks
During play
The track number of the current selection appears.
When "
" is pressed during play, total number of tracks on the disc will be displayed and the unit is still on.
The unit will be returned to full stop mode automatically after approximately 30 seconds if no button is pressed
again within the 30 seconds.
If "
" is pressed again the unit will be returned to full stop mode. If "
play mode.
During pause
The playing track number will flash.
Pause mode of the second track
When no disc is inserted onto the player and when "
" is pressed, the display window shows "
The unit cannot be operated when error message is displayed. After approx. 30 seconds the unit will return to full
stop mode, or reset the player by pressing "
" once and then insert a disc to start playing.
VARIOUS PLAYING MODES
VARIOUS PLAYING MODES
VARIOUS PLAYING MODES
VARIOUS PLAYING MODES
VARIOUS PLAYING MODES
During playback, every time the PLAY MODE key is pressed, the mode would be changed to the next one as
follows:
NORMAL play -> (
)repeat one -> (
NORMAL play - Playing the whole disc
The CD is played once from beginning to end.
REPEAT PLAYBACK (Repeat One and Repeat All)
•
To repeat the same track
Press " PLAY MODE " during play until "
" appears in the
display window. Select desired track to be played only once by pressing
"
" or "
" .
•
To repeat the whole disc
Press " PLAY MODE " during play until "
" appears in the
display window.
INTRO PLAY - Playing the First About Ten seconds of all the selections:
1. Press " PLAY MODE " during play until "
" flashes in the display
windows.
2. Press "
" to begin the " INTRO " play. (Play each track for approx. 10
second).
3. Pressing "
playback in the " NORMAL " play mode.
* " INTRO " play always starts from the first track.
SHUFFLE PLAY - Playing the selections in random order
1. Press " PLAY MODE " during play until " SHUFF " flashes in the
display window.
2. Press "
* To locate the next track: press "
previous track even if you keep "
PROG (Program) Play - Playing the selections in the desired order
First track playing begins
1. Press program button until "
window.
2. Press "
3. Press program button to register track no. 4, for example, as the first
" is pressed the unit returns to
selection. The track no indication will be returned to "
4. Repeat steps 2 and 3. until all the desired tracks are programmed (up
to 20 tracks).
5. Press "
NOTES:
*
Repeat play and " INTRO " play can be performed during program play.
".
*
The program is erased when the disc compartment is opened or the auto power off function turns the
power off.
*
If the program mode is exited by means of the "
Program Edition
To add:
To add additional tracks to your selection during program playback, press "
and then press program button repeatedly until "
Repeat the above step 2 and 3 to store additional tracks.
To check:
Press " PROG " lightly during programming before you press "
)repeat all -> INTRO -> SHUFFLE
Each time " PROG " is pressed the track number appears in the display window.
To change:
When checking press either "
currently displayed. Press " PROG " to register the newly selected track into memory.
To delete:
When open the CD door including that program will be cancelled.
SKIP PR
SKIP PR
SKIP PR
SKIP PR
SKIP PRO O O O O TECTION SY
The SKIP PROTECTION System incorporates a special electronic circuit that prevents sound from skipping
when the unit is subjected to shocks and vibration during play.
When you start playback, the SKIP PROTECTION System turns on and "
in the display to prevent sound skipping.
When the unit receives a physical shock which prevents the laser pick-up from "reading" the CD, this system
immediately starts playing the sound stored in its memory and continues until the laser pick-up recovers.
If the unit is subjected to continuous shocks and all the data stored in memory is used up the sound will skip.
If the vibration stops then the data memory will be restored. If continuous vibration is applied when the data
memory is empty, an error message "
" again will cease the " INTRO " play and continue
" to begin the " SHUFFLE " play.
" . However, you cannot locate a
" pressed.
" and "
" flash in the display
" or "
" to select the desired selection.
".
" , "
" stops flashing and program play starts.
" key, all the programs would still remain in memory.
" flashes in the display window .
" or "
" to alter the track number for the program
TECTION SY
TECTION SY
TECTION SY
TECTION SYSTEM
STEM
STEM
STEM
STEM
" will be displayed. To reset the CD player press "
MAINTENANCE
MAINTEN
MAINTEN
ANCE
ANCE
ANCE
MAINTEN
MAINTEN
ANCE
Cleaning the unit
Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth.
Cleaning CD
If the CD skips or will not play, the disc may need to be cleaned. Before playing, wipe the disc in a circular
motion from the centre out with a cleaning cloth. After playing, store the disc in its case.
Handling the disc
Only touch the CD on the edge to avoid finger prints on its surface. Do not stick paper or tape nor write anything
on the surface.
TR
TROUBLE SHOO
TR
TR
TR
OUBLE SHOOTING GUIDE
OUBLE SHOO
OUBLE SHOO
OUBLE SHOO
TING GUIDE
TING GUIDE
TING GUIDE
TING GUIDE
Should any problem persist after you have made the following checks, consult your nearest service facility.
Disc play does not start:
•
The disc is inserted upside down or incorrectly. Insert the disc correctly with the label surface up
•
Dusty or defective disc
•
Dirty or dusty lens
•
The disc compartment lid is not closed
•
Moisture condensation -> Leave the unit in a warm place until the moisture evaporates
•
The AC power adaptor is not plugged into the wall outlet
•
The unit is not placed on a level surface
•
Weak batteries
No sound from the headsets:
•
The headphones / earphone plug is not firmly connected to the " PHONES " jack
•
Adjust the " VOL " control
•
Dirty plug
No sound from the connected speakers:
•
Check the connections
•
The amplifier is not turned on
Skipping of sound:
•
Dirty or defective disc
" button first
•
Dirty lens.
•
Strong vibration
When using with batteries the battery life is short:
" .
•
Manganese batteries are used. Use alkaline batteries
Display window shows "
operated:
•
No disc , dirty disc or scratched disc. The unit will return to full stop mode after approx. 30 seconds,
or reset the player by pressing "
SPECIFICA
SPECIFICA
TIONS
TIONS
SPECIFICATIONS
SPECIFICA
SPECIFICA
TIONS
TIONS
General
Output (at 1KHz 0dB level)
" indicator appears
Power requirements
Dimensions
Weight
Operating voltage:
U.S.A., Canada:
120V AC +
_
5% 60Hz
" once.
Chile:
230V AC +
_
5% 50Hz
We continually strive to improve our products, specifications may change without prior notice.
" error message and the unit cannot be
" once and then insert a disc to start playing.
Headphones / earphone (stereo mini-jack)
15 mW + 15 mW at 16
W
to 32
W
3V --- (2 x AA / LR6 /MN1500) alkaline batteries, or DC IN 6V, 350mA
power adaptor
Polarity of plug
Approx. 129 x 30 x 142 mm (W/H/D)
Approx. 225g (not include batteries)
Middle East and Australia:
UK and Germany:
240V AC +
_ 5% 50Hz
230V AC
_ 5% 50Hz
+
Singapore, Malaysia & Thailand:
Japan:
200-240V AC +
_
5% 50Hz
100V AC +
_
5% 50/60Hz
Printed in China
811-872191-011
Advertisement
