Lcd Interface - Waveshare E9 Hardware Manual

Hide thumbs Also See for E9:
Table of Contents

Advertisement

Note: Put the Board internet interface upward, J10 interface, from left to right, is 1, 2, 3, and 4.

2.13 LCD Interface

The FPC interface is 40Pin 0.5mm pitch down renovate interface. Its interface definition matches with all LCD display from
Embedsky. And it supports to select resistive or capacitive screen (capacitive screen by default), the touch signal is in the 37pin
to 39pin interface.
When soldering U20, R182 and R185, not soldering R175 and R188, it's for resistive screen;
When not soldering U20, R182 and R185, soldering R175 and R188, it's for capacitive screen;
R175, R182, R185 and R188 are all 0 ohm resistor, 0402 package, they are on the top left of the LCD interface.
Waveshare Electronics
Waveshare Electronics
Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China
TEL: +86-755-83040832
FAX: 86-755-83042572
Web: http://www.wvshare.com/
E-mail: sales@wvshare.com
www.waveshare.com
14

Advertisement

Table of Contents
loading

Table of Contents