Related Manuals for Outdoor Konnect VIPER
Summary of Contents for Outdoor Konnect VIPER
- Page 1 Phone Watch User Guide & Warranty Model: VIPER (www.theiotgroup.com) Printed V1.2.1 (2015) English...
- Page 2 Safety Warning • Fully charge the battery for a minimum of 1 – 2 hours prior to use. • To charge, use the included Micro-USB, and plug into a computer or a USB charging device Powering up / turning off the device •...
- Page 3 Power key: • Turn on / off (hold the button) • Awaken / turn off screen (press once when at main menu) • Back to main menu (press once) Micro-USB port: • Charging and data transfer Navigation • Swipe to the left to navigate to the next screen •...
- Page 4 Getting BT Notifier Android For your convenience we have uploaded the BT Nonfiction APK to our website. Simply visit the following link: http://www.iwantiot.com/viper-support/ From there, you will want to locate the “Download APK” button and click it.
- Page 5 If I have a SIM card in my watch, will I still need the APK? If you have a SIM card in your Viper watch, then you do not need to have the APK installed onto your Android device, unless you wish for your phone and watch to sync with one another.
- Page 6 Go to where the file was downloaded, and unzip the file (this is done by double clicking on the file). If you are on a PC, drag the APK file out of the zip folder (if you are using a Mac, it will automatically do this for you).
- Page 7 Tap on the APK file, it will look the same as the image below (version number may vary depending on time of reading). By default, Android will prevent you from installing an APK this way, however, to provide permission to install the app this way, you will have to enable “Unknown sources”.
- Page 8 Congratulations! You have your BT Notification successfully installed! If you are downloading the file directly onto your Android device, please follow the following steps: Locate where the file has been downloaded, by default your file should be downloaded to the Download folder (you can access this in either File Manager or My Files, depending on the version of Android you are using).
- Page 9 From here, find the file that has been extracted, in this case it is called “Smartwatch_3.0.2_64” and open it. Open the folder, and press the APK file to open, and begin the installation.
- Page 10 By default, Android will prevent you from installing an APK this way, however to provide permission to install the app this way, you will have to enable “Unknown sources”.
- Page 11 Congratulations! You have your BT Notification successfully installed! iPhone • If you are using an iPhone device, not all features of the watch will be able to be accessed. These features include: Cannot access your messages inbox Message notifications will not appear on the watch Bluetooth camera functions do not work Call Log...
- Page 12 Anti-lost By selecting Anti-lost in the main menu, you are able to find your phone by making it ring and vibrate. You can customize what the phone does in the anti-lost menu. Pedometer • Able to measure calories burned, based on the data collected, ranging from number of steps, distance travelled, time elapsed •...
- Page 13 Note: for this function to work, your phone must be unlocked Browser • Access the internet from your Viper watch with the browser app • Please note – Browser only works with SIM card inserted into device, not via Bluetooth connection Warranty: •...
- Page 14 Select your device (if you cannot find your device, check that the Bluetooth is enabled, and visible) Accept the pairing on both the Viper, and your device Installing the micro SIM card The SIM card slot is located on the back of watch, to access it, simply remove the battery from the back of the watch.
- Page 15 Accessing files from the SD card From the main menu, swipe right until you have reached “File Manager” Select SD card Retrieving photos and videos from the SD card For this, you will need a micro SD to USB adapter, or any other means of connecting a micro SD card to a USB.
- Page 16 Brought to you by… www.theiotgroup.com...