Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Sysvideo SN7208
- Page 1 Sysvideo Technology Limited The Manual of Network Video Recorder 2013.6...
-
Page 2: Table Of Contents
Sysvideo Technology Limited Directory 1 Precautions.............................4 2 Declaration.............................4 3 Product Introduction ........................4 3.1 Product Overview .......................4 3.2 Feature..........................5 4 Installation............................5 4.1Unpacking Inspection ......................5 4.2 Installation Preparation .......................5 4.3 Installation of the burner .....................6 The Front Panel......................6 4.4.1 SN7200 Series......................6 4.4.2 SN7800 Series....................7... - Page 3 Sysvideo Technology Limited 6.2 Video Settings ........................20 6.2.1 Basic........................20 6.2.2 Encoding settings ....................21 6.2.3 Snapshot ......................21 6.2.4 Net Channel.....................22 6.3 Record ..........................22 6.4 Network..........................23 6.5 PTZ Configuration ......................25 Alarm ..........................26 6.6.1 Video Detection......................26 6.6.2 Alarm input .....................26 6.6.3 Alarm out ......................27 System.........................27...
-
Page 4: Precautions
Sysvideo Technology Limited 1 Precautions The following content is about use of the product,the prevention of danger as well as preventing property from the loss.Please be sure to comply. 1, Please placed NVRs within the permissible range of temperature and humidity. -
Page 5: Feature
Sysvideo Technology Limited 3.2 Feature Real-time monitoring Have a composite video signal interface and support TV, VGA or HDMI output simultaneously. Compression function Use H.264 video compression standard and G.711 audio compression standard and have high definition, low code rate of the video coding and the storage. -
Page 6: Installation Of The Burner
Sysvideo Technology Limited Prepare a Cross Screwdriver. Steps Remove the metal top cover by removing two screws from the sides of the cover. Place the hard disks on a flat table and tighten the screws. Connect the power and the data lines to the HDD. -
Page 7: Sn7800 Series
Sysvideo Technology Limited 1, IP address of the device,the clock,the external alarm channel,error status code of the machine, remote address, internal temperature of the chassis is displayed. 2, Network Connection status. 3, HDD status and numbers. “E” and flash label refer HDD error. - Page 8 Sysvideo Technology Limited Switch the TAB page. Press 3 seconds to switch into the panel input status. Shift ↑ When activate the input box,activate the input method and switch the state of the input method. Digital input Numeric area Text input...
-
Page 9: The Rear Panel
PTZ control: Zoom +. the shuttle outside The same with the direction key the shuttle inside The same with the direction key 4.5The Rear Panel 4.5.1 SN7200 Series SN7208 Rear Panel Interfaces SN7216 Rear Panel Interfaces SN7232 Rear Panel Interfaces... -
Page 10: Sn7800 Series
Sysvideo Technology Limited 4.5.2 SN7800 Series SN7832 Rear Panel Interfaces Index Name Description video/audio The input interface of the audio signal output network The network interface of RJ-45 interface The output interface of the VGA video signal interface power The power input interface... -
Page 11: The Connection Of Poe
Sysvideo Technology Limited Examples of alarm output connections When the alarm output connect with DC and AC load, please refer to the connection. 4.7 The Connection of POE Step 1: Supply the NVR with the 12V DC power. Step 2: Connect the POE module with 48V directly power. -
Page 12: Preview And Login In
Sysvideo Technology Limited 5.2 Preview and Login in 5.2.1 Preview After the device is turned on, you will enter the real-time monitoring interface. Right click and the following interface will pop up. 5.2.2 Login In Click the image above with [main menu], and then input the user name（default：admin）and the... -
Page 13: Mode Switching
Sysvideo Technology Limited 5.3 Mode Switching The NVR can work in mixed mode or NVR mode. Mixed-mode can be connected with both analog cameras and network cameras while NVR mode can only support IP cameras. Enter [configuration]- [system]-[channel mode] to select the mode. Restart to complete the setting. -
Page 14: Status Display
Sysvideo Technology Limited [Password] Fill in the password of the IPC. [Remote Detect]After completing the above parameters, click the detect button to return the connection status. [Search]Select the appropriate protocol and search.The IPCs and the device should in the same LAN. Double click the search results and it will add the IPC automatically and return to theprevious page. -
Page 15: Ptz Configuration
Sysvideo Technology Limited Click to enter the PTZ configuration page. Refer to 8.2 about more details. 5.5.1 PTZ configuration The direction of PTZ, steps, zoom, focusing, iris, preset points, cruising between points, patrols, sweeping the boundary, calling an auxiliary switch, light switch, horizontal rotation are controlled with the usage of the arrow keys. -
Page 16: Search
Sysvideo Technology Limited 5.6 Search In real-time monitoring screen, right click and select【search】to enter the searching interface. Index Type Description Calendar Date and time Choose the time Input the date and time of records searched. It can achieve a full screen,circle playback, stopping /... -
Page 17: Record
Sysvideo Technology Limited playback 5.7 Record In real-time monitoring screen, right click and select【record】to enter the interface. 【Manual】It has the highest priority and corresponding channels will record for whole days after chosen. 【Schedule】Record according to recoding configuration. 【Stop】Stop recording. Alarm 5.8.1 Alarm Output... - Page 18 Sysvideo Technology Limited ：Open the enable switch. [Sensitivity]Set sensitivity of the network channels. [Set area]It should be set in the IPC. [Process]Click the button to set the alarming time, linkage and the handling method. [Linkage Set]When produce an alarm, you can activate the linkage of records, PTZ, touring and capturing.
-
Page 19: Alarm Status
Sysvideo Technology Limited 5.8.3 Alarm Status If you select [Show Message] in linkage settings, the following message will pop up when the alarm occurs. 5.9 Color Setting Adjust the specified screen (single screen) image color hue, brightness, contrast, saturation, gain... -
Page 20: The Input Method
Sysvideo Technology Limited 5.10 The Input Method In the input box, you can select figures, symbols, English capitalization and the input of Chinese.Click the mouse to complete the input.”← “represents the backspace and “_ “represents a space. The input interface of Englishfigures... -
Page 21: Encoding Settings
Sysvideo Technology Limited 【Channel】Select the desired channel. 【Channel name】Select the channel name. 【Channel display】Set the position of the channel title. 【Time display】The position of the time title in the screen. 【Time Synchronization】Time synchronization of network channels and the device. 【Video cover】Set protected area of previewing and recording. -
Page 22: Net Channel
Sysvideo Technology Limited 【Channel】Select a channel. 【Mode】Trigger:Crawl images when alarm. 【Image Size】CIF capture 【Image Quality】There are 6 levels of quality. 【 Snapshot frequency 】 set highest capture rate for single channel，1s/pc 2s/pc 3s/pc 4s/pc 5s/pc 6s/pc 7s/pc 8s/pc. 6.2.4 Net Channel First, open the enable switch. -
Page 23: Network
Sysvideo Technology Limited Record 【 】 Video mode automatically,manually or not record. 【Video expiration time】The figure is between 0 to 365. 【 Video package time 】 The figure is between 5 to 120. 【HDD full】Overwrite or stop recording. 【Channel】Select a channel. - Page 24 Sysvideo Technology Limited 【DHCP】 Enable the NVR to obtain an IP address automatically. If it is enabled, the NVR will reboot and search for a DHCP server, and then assign a dynamic IP address. The dynamic IP address will be displayed in the menu.
-
Page 25: Ptz Configuration
Sysvideo Technology Limited webclient. Select DDNS type（NO-IP DDNS, Dyndns DDNS, FNT DDNS and so on）. Input the registered server’s IP, port, username and password. Once completed, you can login in the Web client by inputting the domain name in IE. -
Page 26: Alarm
Sysvideo Technology Limited 【Parity】default: None 6.6 Alarm 6.6.1 Video Detection 【Channel】Select a channel. 【Alarm type】 Dynamic monitoring, video loss and video blind. ：Open the enable switch. 【Process】Set the alarming time, linkage and the handling method. 【Area Set】The function should be set in the remote IPC. -
Page 27: Alarm Out
Sysvideo Technology Limited 6.6.3 Alarm out 【Channel】Alarm port 【Auto】Alarm output is determined by the alarm output menu, while in auto mode. 【Manual】Alarm output is on and the status is active. 【Stop】Alarm output is off and the status is inactive. 【Status】Current status of alarm output Notice: Some models have no local alarm, please refer to the products descriptions. -
Page 28: Display
Sysvideo Technology Limited 6.7.2 Display Output mode 【Menu Transparency】Adjust transparency. 【VGA Output】Select VGA resolution. The default is 1024×768@60Hz. Tour configuration Setting tour mode and interval between rotation , the time is within 5-120s， the mode include single screen, four-, eight-, nine-, sixteen-screen. - Page 29 Sysvideo Technology Limited redundancy mode. In read only mode, video data cannot be covered. HDD Record...
-
Page 30: Abnormity
Sysvideo Technology Limited Backup Connect an External USB device with the USB port to backup in the “Record Backup” menu. 【Detect】 Identify external USB device and display the device information. 【Backup】Tick the external device and click 【 Backup 】 to enter the backup menu .Select the record start-stop time and... -
Page 31: Account
Sysvideo Technology Limited 6.7.7 Account Note:Group and user names can be from 1-6 characters in length. Valid characters include letter, numbers, and limited symbols: underline, subtraction sign, dot, you may not use a space as a leading or ending character. -
Page 32: Rs232
Sysvideo Technology Limited Set a group and authorize 60 items including control panel, shut down, live view, playback, record, record backup, PTZ control, account, system information, alarm in /out setting, system configuration, search log, log delete, upgrade, operation authority, etc. -
Page 33: The Control Installation And The User Login Logout
Sysvideo Technology Limited 7.1.2 The control installation and the user login logout Users can remote access to NVR by Internet Explorer, assuming you have a correct network configuration. The following interface will pop up when you access the IP address in Internet Explorer. -
Page 34: The Interface Of Web Operations
Sysvideo Technology Limited 7.1.3 The Interface of Web Operations WEB Interface Description Index Name Description Channel Channel selection Local playback: playback local record Function key Open all: play live views in surveillance window Surveillance window Change window layout Image color: modify brightness, contrast and Image color &... - Page 35 Sysvideo Technology Limited Click on 2 area in upper right corner can choose open / close the channel of the main stream or secondary stream, shows the current NVR's IP and rate information. Stream information Lower left corner shows the current video channel name.
-
Page 36: Ptz Control
Sysvideo Technology Limited 7.1.5 PTZ Control Set protocol（see【Setting】→【PTZ】 ） Control PTZ direction, step size, zoom, IRIS, preset, tour, pattern, border scan, light, wiper, auto pan, etc. Step size controls PTZ direction and speed, e.g. step size 8 is moved faster than step size 1. -
Page 37: Search Record
Sysvideo Technology Limited 【Local operation guide】 Configuration 7.1.7 Search Record Click “Search record” to open the search interface (错误！未找到引用源。), can search and operate record, alarm, motion, local record Search record By selecting the record type, start and end times, and click the check button, get a list of files on the NVR. -
Page 38: Alarm Configuration
Sysvideo Technology Limited 7.1.8 Alarm Configuration Click the 【Alarm】 to enter the alarm setup menu, users can set up and operate the alarm mode. Alarm configuration Choose type of alarm on menu, monitor video loss, motion detection, disk full, disk error, video mask, external alarm. -
Page 39: 8Appendix
Sysvideo Technology Limited 8Appendix Expansion function 8.1.1 DDNS Function FNT DDNS FNT DDNS is built-in professional dynamic DNS service in our network NVR.You can register directly in the device .Specific steps are as following. 1：Select FNT DDNS and check Enable. - Page 40 Sysvideo Technology Limited Create domain name, click 【Add a Host】. Embedded NVR Setting Open 【Main Menu】 → 【Management】 → 【Network】 → 【Advanced】 → 【DDNS】 → 【Enable】 Name Configuration DDNS NO-IP DDNS dynupdate.no-ip.com Port Domain name xxx.xxx.org Username Password xxxxxx Dyndns DDNS（www.dyndns.com）...
- Page 41 Sysvideo Technology Limited Run Command Line Program Input “ping+ Domain name” then presses Enter, as the Diagram 0-1 DNS shows. Diagram 0-1 DNS The computer will analyze the domain name which is set in the NVR and return to the current IP, as the picture shows underlined in red.
-
Page 42: Ptz Control
Sysvideo Technology Limited port mapping chart of the router.There are two ways to map the port: UPnP function automatically map and modify the router’s port mapping chart by manual. Manual port mapping The first step Connect the Embedded NVR to the Router, set the static IP. -
Page 43: Hdd Capacity Calculation
Sysvideo Technology Limited Pattern You can begin the desired path or end a path by filling the figure in the box. 8.2 HDD Capacity Calculation 8.2.1 Reference of HDD Capacity Calculation The first time install NVR, please check if the HDD has installed. - Page 44 Sysvideo Technology Limited How to detect Seagate HDD a) Get into www.seagate.com， Click Support & Downloads choose Sea Tools, download tool, as Diagram 7-1: Diagram 0-2 Seagate download b) Double-click to install downloaded file, click installed file to detect the HDD information on c) Choose the HDD for detection (other manufacturer’s hard disk suitable too).
-
Page 45: Common Faults
Sysvideo Technology Limited 8.3 Common Faults NVR startup failure or continuously reboot Possible reasons: The system has been damaged from a bad NVR update. There is a problem with the NVR main board error, please contact supplier. There is an HDD error. Replace faulty HDD. - Page 46 Sysvideo Technology Limited Diagram 0-4 IE tool bar Internet Explorer 9.0 Possible reasons: Internet Explore9.0 above version visit: Please choose compatible mode.
Need help?
Do you have a question about the SN7208 and is the answer not in the manual?
Questions and answers