Wallpaper - Pyle pldnv66b Instrucion Manual

Plug in flash drives to access music video and photos.
USB - Flash Memory File Browsing
1) Brightness, Contrast, Hue
Video
Press, hold and drag to adjust the brightness, contrast and hue of the display.
2) Presets
Select to automatically adjust the display settings.
Note: Wallpapers can be imported from a flash drive or SD card. Check format sheet online for specs on formats.
Wall Paper
1) Browse - Use left and right arrows to select the desired wallpaper
2) Select - Press OK to select the wallpaper
1) Steering Wheel Controls
Wheel
Select the command in the application, then press the corresponding button on the wheel to teach the unit
how to behave when steering wheel controls are used. To enter the steering wheel menu it will prompt you
for a 4 digit pass code you will need to enter '0000'. Then you can manually program each desired option
following the on screen instructions. (Note: This feature is not compatible with all vehicle types).
Q: Unit doesn't power up
Trouble Shooting
A: Use a multi-meter to check for 12v+ to red and yellow wires. Check for proper Ground on the Black wire.
Q: My video does not play
A: Attach "PARK" wire to parking break. When this wire is grounded the video will play (Grounding trigger of the parking brake)
Q: Reverse camera does not come up on the screen
A: Attach "BACK" wire to reverse tail light 12v+ (Make sure camera is and sending video signal)
Q: Can I set up steering wheel control?
A: Key 1 and Key 2 wires need to be wired to your vehicle's steering wheel column
Q: The time I set is not saved after device reboot
A: Are other setting saved? If not: Check that yellow memory wire is attached to 12v+ constant
A: turn off GPS auto update
-Go to radio settings > Set Time > switch off auto update
Q: My GPS gets no reception.
A: Check antenna is connected properly
A: Mount Antenna directly to your vehicle (GPS antenna is to be magnetically mounted, it will boost GPS reception when attached)
A: Check alternate antenna placement to test for interference
Q: How do I turn up GPS instruction volume (I Can't hear it over music)
A: Change GPS sound settings
Go to Navi > Settings > Sounds > Set GPS voice level to max > Set radio volume to min (Adjust accordingly)
Q: How do I update my map card.
A: The radio will notify you when a map update becomes available. We will need to send out a new map card from our parts
department. Log onto www.pyleaudio.com
Q: Where can I download firmware updates?
A: This unit's hardware does not allow it to be updated with new OS or firmware.
Q: How do I access the Internet?
A: This device is not capable of receiving internet data.
PyleAudio
.com
and open a parts ticket under "contact us" requesting the map update.
Q: How to I set the time?
A: System setting, set time
10.