Do you have a question about the VT-300 and is the answer not in the manual?
Questions and answers
Summary of Contents for Voice It VT-300
Page 1
Instruction Book Voice It Personal Note Recorder Model VT-300...
Page 2
How to Load Batteries 1. Open the battery compartment on the back of the unit by sliding the cover off. Your VT-300 may require one AAA or three AAAA batteries. 2. Install the battery (or batteries) with + and –...
If you cannot find AAAA batteries at retail you may order them directly from VXI Corporation by calling 1-800-47-VOICE (1-800-478-6423) Note: Because this Voice It note recorder uses flash memory, messages will remain in memory even when batteries are removed from the unit.
Page 4
Selecting a Recording Speed You may choose from three recording speeds depending upon your needs. On speed one (pre-set level) you will get about 3 minutes of recording time. To increase recording time you may choose speed two (2) (about 4 minutes) or speed three (3) (about 5 minutes).
Page 5
How to Record a Message 1. Press the RECORD button and release. A red light indicates you are recording. 2. Hold the Voice It note recorder a few inches from your mouth and speak. 3. Press RECORD again to stop recording.
Page 6
Using Channels Your Voice It note recorder allows you to record on one of four channels. One of the four channels is the default channel. The unit is preset at the factory to record on this channel and after about three minutes of inactivity the unit automatically switches to this channel.
Page 7
number of beeps corresponding with the channel you want to name. Then press and hold the CHAN button until the red LED comes on. While the red LED is on, speak your channel name then release the CHAN button. When you release the CHAN button the unit will immediately play back the name you have just recorded.
Page 8
Tip 1: Erasing messages in a channel does not erase the channel name. Tip 2: If you wish to change a channel name, simply record a new channel name by following the procedure described above. Tip 3: The green LED will blink to indicate that the unit is in one of your user-named channels.
Page 9
Tip 1: When using to skip through messages, a green light and high pitched beep indicates progress, a red light and low pitched beep indicates the end of the queue. Tip 2: Pressing while messages are playing allows you to review messages quickly. How to Erase Messages To erase messages selectively —...
of the red LED. To unlock the unit, press and hold the button for five seconds or until you hear a single beep accompanied by a single blink of the green LED. The unit will be at the first message in the default channel. Turning Beeps On and Off: Your unit is pre- set at the factory to emit a variety of beeps when using various functions.
Page 11
pressed in the lock mode. Unlock the unit using the procedure described above. 2. If the unit will not record or erase, check your batteries by removing them and letting the unit rest for at least one minute. Re- install the batteries. If the unit still will not record or erase, or the red LED is flashing every few seconds it is likely that your batteries are depleted.
Page 12
VXI Limited Warranty ® 1. If any VXI Voice It product fails to work for any reason during the first 90 days from the date of the purchase as shown by the purchaser‘s warranty registration, VXI will repair or replace the product, at its election, free of charge.
Page 13
5. Products returned to VXI for Warranty repairs, freight prepaid and with proper Return Authorization, will be return shipped to the customer at VXI’s expense within five (5) days of VXI’s receipt and payment. This equipment generates radio energy. It has been tested and found to comply with the limits for a class B computing device in accordance with the specifications in subpart B of FCC Rules and...
Page 17
For Reference Only Do NOT Print this Page Part # 2306-2002A A/W # 2306-2003A Art size: 2.5" x 3.75" Color: 1/1 Black Binding: single staple; centered Stock: 80# Vellum Opaque White...
Need help?
Do you have a question about the VT-300 and is the answer not in the manual?
Questions and answers