Advertisement

Quick Links

S
I
AFETY
NSTRUCTIONS
1.
Please read these safety instructions carefully.
2.
Please keep this User's Manual for your reference.
3.
Please disconnect the equipment from your AC outlet before cleaning.
Do not use liquid or sprayed detergent for cleaning.
Use moist sheet or cloth for cleaning.
4.
For pluggable equipment, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
5.
Please keep this equipment away from humid areas.
6.
Install this equipment on a reliable surface. If the equipment is not on a reliable surface,
it may drop and cause injury.
7.
The openings on the enclosure are for air convection. Please protect the equipment from
overheating . DO NOT COVER THE OPENINGS.
8.
Make sure the voltage of the power source is appropriate when connecting the
equipment to the power outlet.
9.
Place the power cord where people will not step or trip on it. Do not place objects over
the power cord.
10. All Cautions and Warnings on the equipment should be noted.
11. If the equipment is not in use for several days, disconnect the equipment from the power
outlets to avoid damage by transient power surges.
12. Never pour any liquids into the openings, this could cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should only be opened by
qualified service personnel.
14. If one of the following situations arises, get the equipment checked by a service
personnel:
(a) The power cord or plug is damaged.
(b) Liquid has penetrated into the equipment.
(c) The equipment has been exposed to moisture.
(d) The equipment has not worked well or you can not get it to work according to the
user's manual.
(e) The equipment was dropped and damaged.
(f) If the equipment has obvious signs of damage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED;
STORAGE TEMPERATURE ABOVE 60℃(140℉), IT MAY DAMAGE THE
EQUIPMENT. The sound pressure level at the operators position according to IEC704-
1:1982 is equal or less than 70dB(A)
16. DANGER: Invisible laser radiation when opened. Avoid direct exposure to beam.
Complies with FDA radiation performance standards,21 CFR, subchapter J.
Laser power: Wave Length:783±3mm
Emission power:0.7mW
Laser diode: class 3b
17. The power adapters (L.P.S.) can be used for the product are as listing:
(a)
Asian Power Devices Inc. Type WA-10E05U-AD-S10.
(b)
Asian Power Devices Inc. Type WA-10E05G-AC-EX0.
1
ENGLISH

Advertisement

Table of Contents
loading

Summary of Contents for Lite-on Tech SOSC-2483KX

  • Page 1 ENGLISH AFETY NSTRUCTIONS Please read these safety instructions carefully. Please keep this User’s Manual for your reference. Please disconnect the equipment from your AC outlet before cleaning. Do not use liquid or sprayed detergent for cleaning. Use moist sheet or cloth for cleaning. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
  • Page 2 ENGLISH RECAUTIONS !! Do not attempt to open the drive and service it. Removing the cover may cause exposure to harmful laser beams and electrical voltage. User is recommended to get service by returning the defective drive back to the original vendor where the drive was purchased.
  • Page 3: Table Of Contents

    ENGLISH ABLE OF ONTENTS INTRODUCTION What the COMBO Drive Does………………………………………4 Format Compatibility and Recording Modes………………………4 What You Can Do with the COMBO Drive…………………………5 System Configuration System Requirements for USB 1.1……………………………………6 Additional Requirements for USB 2.0…………………………………6 Features and Controls Front View……………………………………………………………7 Rear View……...
  • Page 4: What The Combo Drive Does

    ENGLISH NTRODUCTION Thank you for purchasing this COMBO drive, a reliable, high-performance external CD rewriter, CD recorder and CD/DVD reader. Please read this manual carefully and keep it handy for easy reference. Use the manual for installation, operation and troubleshooting. What the COMBO Drive Does The COMBO drive is a CD-ReWritable drive that provides professional quality CD performance for writing, rewriting and reading.
  • Page 5: What You Can Do With The Combo Drive

    ENGLISH Session at Once Data can be recorded to disc one session at a time. New sessions can be written later in this mode. More disc space can be used because there is no gap between tracks. Multi session Data can be recorded to disc in one session. New sessions can be written later in this mode. Less disc space can be used because a gap is created between sessions.
  • Page 6: System Configuration

    ENGLISH YSTEM ONFIGURATION System Requirements for USB 1.1 This COMBO drive has a high-speed Universal Serial Bus (USB) 2.0 interface. You can also use it with USB version 1.1. To ensure stable read/write/rewrite performance, an IBM compatible PC system with the following features is recommended. Pentium 166MHz or higher with built-in USB 1.1 controller (some USB controllers or motherboards may not support all types of USB devices.)
  • Page 7: Features And Controls

    ENGLISH EATURES AND ONTROLS Front View Figure: Front view of COMBO drive Busy / Write LED Indication of drive's operation status. The light lit stands for Busy; the light blinking stands for Write/Rewrite. Eject Button Push button to eject the tray. Emergency In case the Eject button isn’t working, insert a small stick or paper clip into this hole to eject the tray.
  • Page 8: Top View

    ENGLISH Note: Because the bundled USB cable and Power adapter are designed for this COMBO drive, please connect ONLY using those accessories bundled in this package. Accessories other than those bundled may cause fatal damage to this COMBO drive. Top View Figure: Top view of COMBO drive LED Indicator Indication of drive's connection status.
  • Page 9: Usb 2.0 Users

    ENGLISH 2.0 U SERS USB 2.0 is a very new technology. Therefore, most computers do not have native support for USB 2.0. You must install a USB 2.0 adapter card for your External COMBO drive to run at USB 2.0 speeds. If you do not have a USB 2.0 card installed, this COMBO drive will still work connected to a standard USB 1.1 connection, but the speed will be limited to USB 1.1 speed.
  • Page 10: Connection

    ENGLISH ONNECTION...
  • Page 11: Installing The Combo Drive

    ENGLISH COMBO D NSTALLING THE RIVE Before you start, please make sure you have installed the proper software for Recording CDs and Playing DVDs. The Recording software and the DVD Playback software are in different CD kits included in the package. Start your computer.
  • Page 12: Operation

    ENGLISH PERATION Operate your COMBO drive only in a horizontal position. If you operate it in a vertical orientation, you may damage the disc or the drive if the drive falls over. To Put a Disc in the Tray While the COMBO drive is powered, push the eject button on the front panel. The disc tray slides out in a few seconds.
  • Page 13: To Remove A Disc From The Tray

    ENGLISH To Remove a Disc from the Tray Push the eject button on the front panel. Pull the disc tray to open it all the way. Remove the disc by applying a finger to the center of the drive spindle, while lifting the edge of the disc with your thumb.
  • Page 14: Recording Cds

    ENGLISH ECORDING Recording Software & Manuals The included Recording software is to give you the best result with ease of use. The detailed user’s manual for the recording software will be automatically installed into your computer when you install the recording software. Please refer to the user’s manual for the detailed operation procedures.
  • Page 15: Playing Cds & Dvds

    ENGLISH & DVD LAYING This COMBO drive will not work alone while applying CDs & DVDs Playback!! The Playback function can only work when the USB Cable between the drive and your PC is well connected. Playback Software You must install the DVD playback software to your computer first. If you do not have any DVD playback software installed in your computer, the included DVD playback software in the CD kit will bring you the best playback result.
  • Page 16: Troubleshooting

    ENGLISH ROUBLESHOOTING If you meet any trouble during installation or normal use of your COMBO drive, please refer to the following information. Read Problems Symptom Possible Causes Solutions No operation. No power. Check if the power cord is connected securely to the connector. USB cable isn't connected Ensure that the USB cable and connectors properly.
  • Page 17: Write Problems

    ENGLISH Write Problems Symptom Possible Causes Solutions Cannot write. Using other authoring Use the authoring software provided with software which does not the COMBO drive. When using other support your COMBO software, ensure your COMBO drive is drive. supported by contacting the software supplier.
  • Page 18 ENGLISH Symptom Possible Causes Solutions USB COMBO drive is not Please refer to the USB 2.0 Users chapter recognized by the Windows and check if the USB driver is installed Operating System. properly. Using other authoring Use the authoring software provided with software which does not your COMBO drive.

Table of Contents