Advertisement
Quick Links
FPV Model: http://www.fpvmodel.com
2015 NEW SKYWALKER 1830 FPV PLANE
USER MANUAL
Thank you for purchasing the 2015 New Skywalker 1830 FPV
Plane. The 2015 New Skywalker is specially designed for First
Person View (FPV) applications.
FPV Model
http://www.fpvmodel.com
E-mail:
sales@fpvmodel.com
Tel: 0086-592-6512160
Advertisement
Related Manuals for FPV 2015 NEW SKYWALKER 1830 FPV
Summary of Contents for FPV 2015 NEW SKYWALKER 1830 FPV
- Page 1 FPV Model: http://www.fpvmodel.com 2015 NEW SKYWALKER 1830 FPV PLANE USER MANUAL Thank you for purchasing the 2015 New Skywalker 1830 FPV Plane. The 2015 New Skywalker is specially designed for First Person View (FPV) applications. FPV Model http://www.fpvmodel.com E-mail: sales@fpvmodel.com Tel: 0086-592-6512160...
- Page 2 FPV Model: http://www.fpvmodel.com Specifications: • 1. Wingspan: 1830MM (single wing length:850mm) • 2. Fuselage length: 1270MM • 3. Wing area: 41.06 dm2 • 4. Flying weight: 2500g-3000g • 5. Centre of gravity：Backwards 90-100mm from wing front edge Recommended Parts (not included)： •...
- Page 3 FPV Model: http://www.fpvmodel.com KIT version configuration： Fuselage, wing, Horizontal tail, tube, accessories bag, sticker Parts listing: (Note: The color of plastic parts may be different from the actual items that you received. Please be subject to the pictures on product page.) ...
- Page 4 FPV Model: http://www.fpvmodel.com （安装过程中，飞机泡沫件和配件全部用胶水沾粘。） 1.首先安装机身机舱，将层板配件沾粘固定在机舱内。 详情见下图； (During the installation process, the plane foam pieces and accessories need to be glued .) 1. Install fuselage cabin, stick and secure the layer board accessories in the cabin. ...
- Page 5 FPV Model: http://www.fpvmodel.com 2.安装机身外围层板配件。为了保证机身沾粘时不会出现误差，请用相应的碳管和层板卡入各部位， 这样机身沾粘才能吻合连接。 详情见下图； 2. .Install the outside plate parts of fuselage. To make sure correctly glue to the fuselage, please use the corresponding tubes and layer boards into different parts, so as to match the connection when glue to the fuselage.
- Page 6 FPV Model: http://www.fpvmodel.com 3.装起落架和舱盖。 详情见下图； 3. Installation of the landing gear and hatch covers. ...
- Page 7 FPV Model: http://www.fpvmodel.com 4.机身电配安装。电机、电调、电池、桨可在机身完成后安装。 详情见下图； 4. Electrical installation. Motor, ESC, battery, and propeller can be installed after the completion of fuselage installation. ...
- Page 8 FPV Model: http://www.fpvmodel.com 5.垂尾安装。先将塑料件沾好固定，再排好延长线，然后沾粘固定。 详情见下图； 5. Vertical tail installation. Plastic parts glued first, and then the extension cord, and then glued and secured. ...
- Page 9 FPV Model: http://www.fpvmodel.com 6.平尾及舵机安装。把调试好的舵机固定在槽内，再将塑料件沾粘固定。 详情见下图； 6. Flat tail and the steering gear installation. To have a good debugging of the steering gear is fixed in a groove first, and then stick plastic parts. ...
- Page 10 FPV Model: http://www.fpvmodel.com 7.舵角和拉杆安装。 详情见下图； 7. Rudder Angle and pull rod installation. ...
- Page 11 FPV Model: http://www.fpvmodel.com ...
- Page 12 FPV Model: http://www.fpvmodel.com 8.机翼安装。将调试好的舵机和相应的加强配件沾粘固定。 详情见下图； 8. Wing installation. Stick the servo which has adjusted well to the corresponding strengthening parts and secured. ...
- Page 13 FPV Model: http://www.fpvmodel.com 9.重心：机翼前缘向后 95-100MM。 详情见下图： 9. Centre of gravity: Leading edge back 95-100 MM. 10.安装完成； 10. Finally the installation is completed. ...
- Page 14 FPV Model: http://www.fpvmodel.com Thanks for Watching! ...
Need help?
Do you have a question about the 2015 NEW SKYWALKER 1830 FPV and is the answer not in the manual?
Questions and answers