Universal Remote User Manual
3. Enter 9 9 0. The LED blinks twice.
4. To view the code for the first digit, press 1. Count the LED blinks (for example, three blinks =
3), and write down the number in the appropriate code listing in step 1 under
Device " on page
Note: If a code digit is 0, the LED does not blink.
5. Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the third digit, 4
for the fourth digit, and 5 for the fifth digit.
6. To check for other device codes, repeat these instructions, substituting the device button for
TV.
2-8
2-6.
v1.0, October 2008
Programming the NETGEAR Universal Remote
"Programming a