Advertisement
Quick Links
Movement Instructions Manual
CAL. VD53B (Manufacturer SII (Seiko) 24-HOUR CHRONOGRAPH
Features
-Hour, minute- and second hands.
-Date
-Stopwatch
-The stopwatch can measure up to 59' 59".
-Split time measurement.
Movement Size 12'''
Outside Diameter 29.50 mm (12H-6H) x 26.00 mm (3H-9H)
Casing Diameter 28.80 mm (12H-6H)
Height 4.57 mm (Include battery)
Battery SR920SW
Battery Life Approx. 2 years
-Battery life indicator.
When the battery nears its end, the second hand moves at two second intervals instead of normal one
second interval. In that case, have the battery replaced with a new one as soon as possible.
Note: The watch remains accurate while the second hand is moving at two second intervals.
PANSAR SWEDEN AB
1/4
mässvägen, 125 30 Älvsjö, Sweden
Advertisement
Summary of Contents for qp Pansar Supercharged 002
- Page 1 Movement Instructions Manual CAL. VD53B (Manufacturer SII (Seiko) 24-HOUR CHRONOGRAPH Features -Hour, minute- and second hands. -Date -Stopwatch -The stopwatch can measure up to 59' 59". -Split time measurement. Movement Size 12''' Outside Diameter 29.50 mm (12H-6H) x 26.00 mm (3H-9H) Casing Diameter 28.80 mm (12H-6H) Height 4.57 mm (Include battery) Battery SR920SW...
- Page 2 Movement Instructions Manual How to set time and date: Before setting the time, check if the stopwatch second and minute hands are at the “0” position (12 o’clock). If the stopwatch is in use, press the button in the following order to reset it, and then, check if the hands return to “0”...
- Page 3 Movement Instructions Manual How to use stopwatch functions: he stopwatch can measure up to 59' 59" in 1 second increments. When the measurement reaches 60 minutes, the stopwatch automatically stops counting. Standard measurement Start Stop Reset Accumulated elapsed time measurement Start Stop Start...
- Page 4 Movement Instructions Manual How to adjust the stopwatch: If the stopwatch minute- and second hands are not in “0” position, follow the procedure below to set them. • Pull the crown out to 2nd. click position. • Press button (A) or (B) to reset the stopwatch second and minute hands to “0”...