Related Manuals for RAD Cycle Products RAD MAX Prozone 1102
Summary of Contents for RAD Cycle Products RAD MAX Prozone 1102
- Page 1 Replace Photo RAD Cycle Products MAX RACER PRO RAD Cycle Products 1102 Prozone Bike Trainer INSTRUCTION MANUAL INSTRUCTION MANUAL Copyright 2012 DTX International Copyright 2011 DTX International...
- Page 2 WARRANTY AND RETURN POLICY All RAD Cycle Products are warrantied against defects in material and workmanship for a period of one year. Our return policy allows 30 days from the date of delivery to return products, provided it is new, unused and in the original packaging as received.
-
Page 3: Operating Instructions
OPERATING INSTRUCTIONS Tightening Rod PARTS DIAGRAM Tightness Adjuster Rake Quick Clamp Frame Magnetic Resistance Set Handlebar Resistance Controller SAFETY RECOMMENDATIONS WARNING! TO AVOID SERIOUS INJURY ALWAYS FOLLOW INSTRUCTIONS AND SAFETY RECOMMENDATIONS. v NEVER use trainer on uneven surfaces, always set up your PROZONE trainer on a flat, even surface. v HARD BREAKING during use of the PROZONE trainer may cause excessive wear on bike tires and the trainer. - Page 4 Install the two hex screws with plastic lock nut and washer onto the bolt. washers into the large holes (A or B) RAD Cycle Products MAX RACER PRO and tighten with included allen wrench. INSTRUCTION MANUAL Copyright 2012 DTX International...
- Page 5 How to adjust the Prozone Trainer for Use 1) With a bicycle locked into the trainer, push the blue locking lever down to push the mag roller closest to the rear wheel. [Figure 1] 2) Begin adjusting the knob counter clockwise [Figure 2] to increase friction, or clockwise [Figure 3] to decrease friction until the mag roller comes in contact with the rear wheel.
- Page 6 OPERATING INSTRUCTIONS ATTACHING YOUR BIKE TO THE PROZONE TRAINER End Fitting For best results make sure that your tires are inflated to the maximum pressure allowed for your tire. FIGURE 3 To avoid unnecessary wear and tear on your bike tires, when not using your PROZONE Rake Quick trainer, make sure the resistance is set to Clamp...
- Page 7 OPERATING INSTRUCTIONS ATTACHING YOUR BIKE TO THE PROZONE TRAINER 6. Thread the cable for the handlebar resistance controls around your bike and mount the resistance controller to your handle- bars. Be sure to attach the controller within easy reach of your hands while riding (Figure 9).
Need help?
Do you have a question about the RAD MAX Prozone 1102 and is the answer not in the manual?
Questions and answers