System Menu; Analogue Manual Tuning; Power Save; Favourites Edit - Panasonic viera TH-24C400Z Operating Instructions Manual

[System Menu]

■
[Shipping Condition]
Resets all settings, including tuning data, to the original
condition.
– Access this function and follow the on-screen
instructions to complete the procedures.
– Initial Setup (p. 8) will automatically start after
[Shipping Condition] completes.
■
[System Update]
■
[Software Licence]
Displays the software licence information.
■
[System Information]
Displays the software version.

[Power Save]

Reduces brightness of picture to economise on power
consumption. [Off] / [On]
Using the [Tuning Menu]
Use the [Tuning Menu] to retune the TV automatically or
manually, add new channels, check signal conditions,
create your favourite channel lists, skip unwanted
channels, etc.
[Auto Tuning] (TV mode only)
Retunes the channels received in your area
automatically.
●
Automatically searches and adds available channels to
the memory.
●
After the scan is complete, all previously saved
channels will be erased.
Example:
Auto Tuning
Status: Scanning...
Analogue : 0
Digital : 1
Scan
EXIT
RETURN
●
When the operation is completed, the channel at the
lowest position will be displayed.
●
If tuning has not been done completely, perform

[Analogue Manual Tuning].

[Scan]
Adds new channels automatically to the channel list.
Example: Antenna
Scan
Status: Scanning...
Analogue : 0
Digital : 1
Scan
16
(p. 18)
5%
5%
[Analogue Manual Tuning]
Sets analogue channel manually.
Example: Antenna
Analogue Manual Tuning
Searching Channels
Start Frequency (MHz)
Scan up Scan down
1
Enter the frequency to start scanning.
2
Select the scanning method.
Select
OK
• [Scan up]: Scans ascendingly from the entered
frequency to higher frequencies.
• [Scan down]: Scans descendingly from the entered
frequency to lower frequencies.
[DVB-T Signal Condition]
Shows the Digital TV signal condition.
Example:
DVB-T Signal Condition
Channel 40
Signal Level
Signal Condition
Bit Error Rate 0.00E-06
These bars show the maximum signal value of the
selected channel.
[DVB-T Manual Tuning]
Searches for the Digital TV channels manually.
All channels found will be added to the Channel List.
Select a channel position, then start tuning.
DVB-T Manual Tuning
Scan
Channel 40
Signal Level
Signal Condition
Change
OK
Access

[Favourites Edit]

Creates favourite channel lists from various
broadcasters.
Select a channel to add or remove from the list.
( : Encrypted channel)
Favourites Edit
4 Digital
40 Digital
901 Analogue
902 Analogue
Select
OK
Add / Remove
48.00
96
96
Antenna
0%
96
96
: Add
: Remove