Setting Up Your Humidifier - Honeywell HEV680 SERIES Instruction Manual

HEV680 Series HUMIDIFIER COMPONENTS
How Evaporative Humidification Works:
A Wicking Filter inside the humidifier absorbs water from the Reservoir. A fan pulls dry air from
the room into the humidifier where it passes through the saturated Wicking Filter. The Filter
captures minerals and other impurities from the water, before the moisture is evaporated back
into the dry room with the help of the fan. The amount of moisture output depends on many
factors, including the current room humidity and temperature. As the humidity level in the
room increases, the moisture output decreases, which prevents over humidification.
Motor
Housing
Tank Cover
Tank Handle
Water
Tank
Plunger
Housing
Plunger
Water
Reservoir

SETTING UP YOUR HUMIDIFIER

1. Remove packaging
material. Keep this
Instruction Manual
for future reference.
2. Remove twist tie and
extend power cord.
3. Place the humidifier
on a firm, level, water resistant surface at least 12" (30 cm) from any walls. Do not block
Intake Grill on base of unit. Do not place on surfaces that can be damaged by water.
Wicking
Filter
Step 1
Intake
Grill
Base
Float
Step 2
Tank Cover
Water
Tank
Humidity
Humidity
Level Knob
Reached
Indicator
Power/Output
Knob
Step 3
Refill
Indicator
3