Advertisement
ASSEMBLY INSTRUCTIONS
FIRSTBIKE "BASIC," "STREET AND CROSS" MODELS
C
A
B
Open plastic bags containing headset axle
1.
(Part A), lubricant (Part B), and plastic cover
(Part C).
Open the lubricant (Part B) and lubricate the
2.
headset axle (Part A) and contact surfaces of the
front fork and frame using 2-3 drops for each
surface.
Hold the front fork and frame together at
3.
the headset groove and insert the headset
axle (Part A), threaded side on top, into the
headset. To ensure the headset axle (Part A)
is inserted completely, the wheel bolt (Part D)
may be placed on top of the headset axle (Part
A) and gently tapped into place with a rubber
mallet to avoid damaging parts.
Insert the plastic cover (Part C) into the groove
4.
above the inserted headset axle (Part A) to
close the hole. To ensure the plastic cover (Part
C) is completely inserted, you may gently tap
the plastic cover with a rubber mallet to avoid
damaging parts.
To fi t the front wheel, turn the FirstBIKE upside
5.
down so that it rests on the seat and handlebar.
4
Advertisement
