Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for McCauley Sound MCS 2.6
- Page 1 McCauley MCS 2.6 User’s Manual...
-
Page 2: Important Safety Information
GROUND OR SIGNAL CABLE SHIELD CONNECTIONS TO PREVENT GROUND LOOPS. • ANY SUCH DISCONNECTIONS ARE OUTSIDE THE RECOMMENDED PRACTICE OF McCAULEY SOUND, INC. AND WILL RENDER ANY EMC OR SAFETY CERTIFICATION VOID. For continued compliance with international EMC legislation ensure that all input and output cables are wired with the cable screen connected to Pin 1 of the XLR connectors. -
Page 3: Table Of Contents
• Navigating: Utilities Menu • Stereo Link • Delay Units • Lock Out • MIDI Channel • Contrast • MIDI Dump • Delete Program • Navigating: Inputs Menu • Delay • EQ McCauley MCS 2.6 User’s Manual page 3 of 15... -
Page 4: Quick Start Reference
• BELL can be set up. To enter the Utilities menu, press the • Low-Shelf with 6dB slope (Lo6) RIGHT key from the default screen. • Low-Shelf with 12dB slope (Lo12). McCauley MCS 2.6 User’s Manual page 4 of 15... -
Page 5: Setting The Limiters
• Output LED metering, showing signals from -20dB to +6dB over limit threshold. • Front panel mutes. • Polarity reverse on each output. • Electronically balanced inputs and outputs. • MIDI and RS-232 ports on rear panel. McCauley MCS 2.6 User’s Manual page 5 of 15... -
Page 6: Installation Issues
McCauley MCS 2.6 User’s Manual page 6 of 15... -
Page 7: Rear Panel Connections
Use the UP / DOWN (PARAMETER) keys to adjust a parameter. (When adjusting a value, pressing a key once will usually give a small increment / decrement whilst holding a key down will give a larger increment/ decrement). McCauley MCS 2.6 User’s Manual page 7 of 15... -
Page 8: Controls & Meters
MUTED. Mute status is saved when a program ing the output mute relays. This takes a few seconds. is stored. McCauley MCS 2.6 User’s Manual page 8 of 15... -
Page 9: Navigating: Utilities Menu
(STORE) to confirm deletion. (NOTE: Programs marked pair of units for stereo operation. Performing a MIDI dump ‘M’ cannot be deleted from USER units) McCauley MCS 2.6 User’s Manual page 9 of 15... -
Page 10: Navigating: Inputs Menu
To add EQ to an input, step through the functions on the desired channel using the LAST / NEXT keys until you reach the screen that shows the EQ parameter you wish to edit. (See ‘EQ screens’ for more details). McCauley MCS 2.6 User’s Manual page 10 of 15... -
Page 11: Navigating: Outputs Menu
Selects the Edge filter type and slope as for the higher McCauley MCS 2.6 User’s Manual page 11 of 15... -
Page 12: High X-Over
OUT is the last step at the clockwise position. NOTE: Pushing the UP / DOWN (PARAMETER) keys will decrease the frequency, to the final clockwise position OUT, which DOES NOT mute the output.EQ McCauley MCS 2.6 User’s Manual page 12 of 15... -
Page 13: Navigating: Eq Menu
Pushing the Parameter UP key widens the EQ (lower Q), pushing the DOWN key makes the EQ narrower (higher Q). EQ Width is available between 0.05 and 3 Octaves, in 0.05 increments. McCauley MCS 2.6 User’s Manual page 13 of 15... -
Page 14: Store, Recall & Security
This status can be changed by anyone who accessed.To exit from the store screen without storing a knows how to operate the McCAULEY MCS2.6. program, press the recall button. McCauley MCS 2.6 User’s Manual page 14 of 15... -
Page 15: Specifications
• Power Supply AC Mains 50/60Hz, 90V - 264V • Power Consumption <30VA McCauley Sound, Inc. 16607 Meridian Avenue East Puyallup, WA 98375 - USA Call Toll Free 1-877-McCauley 253.848.0363 253.841.3050 fax http://www.mccauley.com McCauley MCS 2.6 User’s Manual page 15 of 15...
Need help?
Do you have a question about the MCS 2.6 and is the answer not in the manual?
Questions and answers