Safety Information - E&C ITS 3000 Installation And Operation Manual

1. Safety Information

Read the below listed instruction before installing or
operating your E&C ITS 3000.
Ø
Check whether the received materials are in good
condition.
Ø
T o reduce the risk of electric shock disconnect the ITS
3000 from the power outlet before installing or
connecting to other equipment. Reconnect the power
cord only after all connections are made.
Ø
Any kind of metallic connector should be handled after
the power has been removed.
Ø
Connect the equipment to a three-wire AC outlet (two
poles plus ground) that is connected to appropriate
branch circuit/mains protection (a fuse or circuit
breaker). Connection to any other type of receptacle
may result in a shock hazard.
Ø
T o switch off and disengage the ITS 3000, press and
hold both UPS Off buttons for more than one second to
switch off the equipment, then disconnect the ITS 3000
from the AC power outlet.
Ø
Pluggable
conductor which carries the leakage current from the
load devices (computer equipment). T otal leakage
current must not exceed 3.5 mA.
equipment includes
Page 2
Installation and Operation Manual
a protective earth