Advertisement
Available languages
Available languages
FXLED 200W 300W SLIPFITTER BILEVEL INSTRUCTIONS
®
Thank you for buying RC lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RC Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
WIRING
1. Bi-level fixtures have LED's wired in sets of four LEDs. The sets are shown below.
2. Each set has leads brought through the slipfitter and labeled.
3. Use the set for switching as needed in your application.
Set# 2
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation
operation or maintenance.
Easy Installation & Product Help
Tech Help Line
©2015 RC LIGHTING, LLC
Call our experts 888 722-1000
Northvale, New Jersey 07647 USA
FXLED BL IN 0515 RCL
rclighting.ca
Visit our website for product info
Set# 1
Set# 2
email
Answered promptly sales@rclighting.ca
Advertisement
