Download Print this page

Advertisement

Quick Links

Instruction manual VibraLITE 8
LIGHT
3 TIME ZONES
VIBRATION ‚ON' ICON
ALARMS ‚ON' ICONS
MODE
OPERATING MODES
1) Calendar/Clock
2) Alarm
4) Timer
5) Option
Note: - To set Calendar/Clock, Alarms and Timer, the digits that you want to set MUST BE
FLASHING.
- When setting Calendar/Clocks, Alarms or Timer: if a delay of approx. 3 minutes
occurs without buttons being pushed, digits will stop flashing and watch will return to
Calendar/Clock mode.
ST/STOP
SOUND ‚ON' ICON
HOURLY ALERT ICON
AM/PM INDICATOR
SET/RESET
3) Chrono (Stopwatch)
1. CALENDAR/CLOCK MODE
Three Time Zones are available. Set Time Zone 1 for time of day of your home location. This
is the default Time and will show on the watch at all times when it is in the Calendar/Clock
mode. You have the option of setting Time Zones 2 and 3.
Note: Time Zone 1 must be set correctly for the time of day as the alarms will work based
on this time.
SETTING TIME OF DAY AND CALENDAR
1.
Push MODE button to rotate to Calendar/Clock Mode.
2.
Push and hold SET/RESET button. HOLD TO SET will show on display. Hold the button
for 3 seconds and T-ZONE 1 will show and flash.
3.
Push MODE button. Hour digits will flash.
4.
Push ST/STOP button to rotate hour to correct hour for Time 1 setting.
Note: If using a 12 Hr Clock, make sure that you select AM or PM correctly.
5.
Push MODE button again. Minute digits will flash.
6.
Push ST/STOP button to rotate minutes to the correct time.
7.
Push MODE button again. Second digits will flash.
8.
Push ST/STOP button to rotate seconds to the correct time.
9.
Push MODE button again. Day of Week digits will flash.
10. Push ST/STOP button to rotate to correct day of the week.
(MO = Monday, TU = Tuesday, WE = Wednesday etc.)
11. Push MODE button again. Month digits will flash.
12. Push ST/STOP button to rotate to the correct number of the month
(1 = January, 2 = February, 3 = March etc.)
13. Push MODE button again. Day of Month digits will flash.
14. Push ST/STOP button to rotate to the correct day of the month
15. Push MODE button again. TIME 12 HR will show and flash.
16. Push ST/STOP button to switch between 12 Hour (AM/PM) and 24 Hour mode.
17. Push MODE button again. DATE MM-DD will show and flash.
18. Push ST/STOP button to switch between MM-DD and DD-MM mode.
19. Push MODE button again. T-ZONE 1 will show again and flash. While [1] is flashing you
can continue to set T-ZONE 2 or T_ZONE 3 if desired by pushing ST/STOP button to
enter T-ZONE 2 or 3. Just follow the same steps as for setting T-ZONE 1.
20. Push SET/RESET button to complete setting.
TO VIEW TIME IN TIME ZONE 2 OR 3
While in Calendar/Clock mode (Time Zone 1)
1.
Push ST/STOP button. Time set will show for 3 seconds with T2 in upper left corner of
display.
2.
Push ST/STOP button again within 3 seconds to view T3. Display will automatically
return to time set in Calendar/Clock (Zone 1).

Advertisement

loading
Need help?

Need help?

Do you have a question about the 8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VibraLITE 8

  • Page 1 Instruction manual VibraLITE 8 1. CALENDAR/CLOCK MODE Three Time Zones are available. Set Time Zone 1 for time of day of your home location. This is the default Time and will show on the watch at all times when it is in the Calendar/Clock mode.
  • Page 2 2. ALARM MODE 3. CHRONO/STOPWATCH MODE Up to 8 Alarms can be preset for daily repetition. Alarms will activate based on Time-Zone 1 The stopwatch can count up to 23 hours, 59 minutes and 59.99 seconds. settings. Alarm activation is for approx. 20 seconds with automatic shut off. Alarm may be 1.
  • Page 3 10. Push MODE button. REMIND will show on display. TO REVIEW OPTION SETTINGS 11. Push ST/STOP button to select REMIND ON or REMIND OFF. 1. Push MODE button to rotate to Option mode. With REMIND ON - when the countdown is set for more than 5 minutes and less then 10 2.
  • Page 4 Short instruction to adjust the Daylight Saving Time Step 1 Step 2 Step 3 Step 4 Push Push MODE Push Push SET/RESET once, the hour START/STOP SET/RESET to until T-ZONE 1 digits will flash to adjust the complete begins to flash hours setting www.vibralite.de www.vibralite.ch www.vibralite.at...