Physical Interfaces - nerian SP1 User Manual

Busy LED
Power LED
Figure 4: Interfaces on (a) front and (b) rear housing side.
5

Physical Interfaces

Figures 4a and 4b show the interfaces on the SP1's front and backside. The
power jack is located on the backside, and it needs to be connected to the
supplied power adapter or an equivalent model. When using an alternative
power supply, please make sure that the voltage is set no higher than 5 V DC,
as otherwise the device might be damaged.
The front side features the following interfaces:
Power LED: Indicates that the device is powered up and running.
Busy LED: Indicates that the device is currently processing incoming input
data.
Trigger port: Port for providing two camera trigger signals. See Section 6.4.
Ethernet port: Port for connecting to a client computer. It is used for de-
livering processing results, and for providing access to the configuration
interface.
USB port: Port for connecting the desired USB cameras through a USB hub.
Trigger port
(a)
(b)
6
5 PHYSICAL INTERFACES
Ethernet port
USB port
Power jack