Able Planet BT400 Instruction Manual

LED STATUS CHART
POWER ON LED flashes blue 3 times
POWER OFF LED flashes red 3 times
PAIRING LED flashes between blue and red
STANDBY MODE LED is solid blue
AV ACTIVE MODE LED flashes blue twice every 2 seconds
HEADSET ACTIVE MODE LED flashes blue once every 2 seconds
LOW BATTERY INDICATION LED flashes red once 2 sec continuous
AUTO SHUTDOWN LED flashes red 3 times and powers off
(5 minutes with no Bluetooth® connection)
CHARGING LED is solid red
COMPLETE CHARGING LED is off
4
LOCATION OF PARTS AND CONTROLS
1. Volume Up Button
2. Play/Pause Button
3. Volume Down Button
4. Multi-function Button/LED
5. Forward Button
6. Backward Button
7. Microphone
8. DC Charging Port
CHARGING HEADSET
1. Plug one end of the included USB cable into the DC Charging Port on the Headset.
2. Plug the other end into a USB port on your computer, or a USB AC adapter/5V 1A (not included)
and connect to an electrical outlet.
3. The LED will illuminate solid red while charging. The LED will shut off when fully
charged. The Headset takes approximately 3hours to charge from a completely
depleted battery.
4. You have approximately 8 hours of use from a fully charged battery, depending upon the
functions being used.
POWERING HEADSET ON AND OFF
1. Press the MULTI-FUNCTION BUTTON for 3 seconds. The LED will flash blue three times and you
will hear an ascending tone. The headset is now powered on.
2. Press the MULTI-FUNCTION BUTTON between three to five seconds. The LED will flash red three
times and you will hear a descending tone. The headset is now powered off.
Foldable Bluetooth® Headset
BT400
1
2
3
5
4
6
7
1