Tansun Quartzheat Monaco single SOR 215IP UK-M Reference Manual

Download this manual

Enlarged version

8. The emitter the wires should be pulled out of the side slots and the emitter can be lifted up completely (Fig. L). The

wires should be gently pulled so they come out from behind the reflector.

Fig. L

9. The emitter should now be removed from the heater as shown in Fig. M.

10. Refit the new emitter in reverse order ensuring that no wires get trapped and all screws are fully tightened.

F o l l o w i n g i n f o r m a t i o n i s o n l y f o r E U - m e m b e r s t a t e s :

The use of this symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed

of correctly, you will help prevent potential negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this

product, please contact your local council, your household waste disposal service or the shop where you purchased the

product.

©Tansun Limited 2014

Part No. 042220-M

Issue. 1a

Monaco

Fig. M

Reference Manual

Single

UK & EUROPEAN MODELS:

SOR 215IP UK-M

SOR 215IP EU-M

Spectrum House, Unit 1, Ridgacre Road, West Bromwich,

West Midlands, B71 1BW, England.

Tel: +44 (0)121 580 6200 - Fax: +44 (0)121 580 6222

Email: quartzinfo@tansun.com - Website: www.tansun.com

Need help?

Do you have a question about the Monaco single SOR 215IP UK-M and is the answer not in the manual?

Page 1 8. The emitter the wires should be pulled out of the side slots and the emitter can be lifted up completely (Fig. L). The wires should be gently pulled so they come out from behind the reflector. Reference Manual Monaco Single Fig.
Page 2 Ca ut ion 4. At the back of the heater, remove the plate holding the terminal box by removing the two fixing screws as shown in Fig. G. When using Tansun electrical heaters, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before using this heater.
Page 3 M a i n t e n a n c e Do not use an extension cord with this product because the extension • cord may overheat and cause a risk of fire. In the event of heater failure, or for spare parts or advice, please contact Tansun Limited in the first instance. Disconnect from the mains before commencing any maintenance procedure including cleaning.
Page 4 I n t r o d u c t i o n Always allow the heater to cool before attempting to reposition/move. Never attempt to move the heater while it is Fig. B The Monaco heater produces radiant heat like the sun, warming people and objects rather than the air in between. It is switched on! mounted on an adjustable bracket that allows the heat to be directed exactly where it is required.