Download Print this page

Technical Data - Box-Design Pro-Ject CD Box RS User Manual

Advertisement

Technical data

Media
CDDA
Hybrid SACD
CDR / CDRW
CDR / CDRW
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact
your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use. Modification or
change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the
lawful rights of the customer.
Copyright
Pro-Ject is a registered trademark of H. Lichtenegger.
The information was correct at the time of creating this manual. The manufacturer reserves the right to make changes to the
technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.
Mains voltages
100-240VAC
Outboard power supply
20V/3A DC (3pole miniXLR connector)
Power consumptions
600mA/90mA (playing/stop)
Dimensions
205Wx200(210)D x70H (with sockets)
Remote batteries
CR2025
Digital outputs
1 x RJ-45 differential I2S for CD Box RS in Sonic2 Srambling Mode – 176.4 kHz
1 x Coaxial SPDIF – 44.1 / 88.2 kHz switchable upsampling
1 x Optical SPDIF – 44.1 / 88.2 kHz switchable upsampling
1 x Coaxial Balanced AES/EBU – 44.1 / 88.2 kHz switchable upsampling
Precision clock input
1 x BNC; 16,9344MHz from DAC box RS, Pre Box RS Digital (Sonic2 only)
Data type
CD digital audio
CD layer
CD digital audio
MP3, WMA, FLAC (ISO9660, Joliet)
Pro-Ject CD Box RS User´s manual, 6.3.2014
Remark
Decoder / stereo
including text
CDDA
MP3
WMA
FLAC
Multi session, finalized
Bitrate/fs/bits per sample
Remark
1.411 Mbps/44.1kHz/16bit
up to 2.56Mbps/48kHz/16bit
up to 2.56Mbps/48kHz/16bit
Lossy WMA9 stereo,no DRM
up to 4.5Mbps/96kHz/24 bit

Advertisement

loading