PSC Scanning QuickScan 1000 User Manual

Nomenclature/Labeling
This illustration shows label placement ONLY.
For actual regulatory, patent and other application
information, view the labels on the products itself,
or call your nearest sales or service office.
Scan Window
LED
Cable
Release Hole
Figure 6
Class II
1. LASER RADIATION — DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1. LASERSTRAHLUNG — NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
1. VARO! LASERSÄTEILYA ÄLÄ TUIJOTA SÄTEESEEN
LUOKAN 2 LASERLAITE
1. RAYONNEMENT LASER — NE PAS REGARDER DANS LE
FAISCEAU APPAREIL A' LASER DE CLASSE 2
1. LUZ LASER — ¡NO MIRE HACIA EL RAYO! CATEGORIA 2
PRODUCTO LASER
1. LUZ DE LASER
NAO OCHE NO RAIO CATEGORIA 2 PRODUTO LASER
1. RADIAZIONE LASER — NON FISSARE IL FASCIO
APPARECCHIO LASER DI CLASSE 2
1. VARNING — LASERSTRÅLNING
STIRRA IJ IN I STRÅLEN — KLASS 2 LASER APPARAT
1. ADVARSEL — LASERSTRÅLING IKKE STIRR INN I STRÅLEN
— LASER KLASSE 2 PRODUKT
1. ADVARSEL — LASERSTRÅLING — SE IKKE IND I STRÅLEN
— KLASS 2 LASER PRODUKT
Laser Cautions
QuickScan 1000 is certified in the U.S. to conform to the
requirements of DHHS/CDRH 21CFR Subchapter J for Class II
laser products. QuickScan 1000 scanners are also certified as
Class 2 laser products to the requirements of IEC 825-1:1993.
Class 2 and Class II products are not considered to be hazardous.
The QuickScan 1000 contains internally a Visible Laser Diode
(VLD) at a wavelength of 650-670 nanometers. The scanner is
designed so that there can be no human access to harmful levels
of laser light during normal operation, user maintenance, or during
prescribed service operations.
CAUTION
Do not attempt to open or otherwise service any components in
the optics cavity. Opening or servicing any part of the optics
cavity by unauthorized personnel may violate laser safety
regulations. The optics system is a factory only repair item.
FCC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Power Supply
Unit requires either a Listed Class 2 or Listed LPS power source
which supplies power directly to the scanner.
Asia Pacific Italy
PSC Hong Kong PSC S.r.l.
Hong Kong Vimercate (MI), Italy
Telephone: [852]-2-584-6210 Telephone: [39] (0) 39/62903.1
Telefax: [39] (0) 39/6859496
Telefax: [852]-2-521-0291
Australia Japan
PSC Asia Pacific Pty Ltd. PSC Japan K.K.
North Ryde, Australia Shinagawa-ku, Tokyo, Japan
Telephone: [61]0(2)9878 8999 Telephone: [81] (0)3 3491 6761
Telefax: [61]0(2)9878 8688 Telefax: [81] (0)3 3491 6656
France Latin America
PSC Sarl PSC S.A., INC.
LES ULIS Cedex, France Miami, Florida, USA
Telephone: [33].01.64.86.71.00 Telephone: (305) 539-0111
Telefax : [33].01.64 46.72.44 Telefax: (305) 539-0206
Germany United Kingdom
PSC GmbH PSC Bar Code Ltd.
Watford, England
Darmstadt, Germany
Telephone: [49] (0) 61 51/93 58-0 Telephone: [44] (0) 1923 809500
Telefax: [49] (0) 61 51/93 58 58 Telefax: [44] (0) 1923 809 505
www.pscnet.com
Corporate Headquarters PSC Scanning, Inc.
675 Basket Road 959 Terry Street
Webster, NY 14580-9787 Eugene, Oregon 97402
Telephone: (716) 265-1600 Telephone: (541) 683 -5700
Telefax: (716) 265-6400 Telefax: (541) 686-1702
© 2000 PSC
R44-2017 (Rev. C)
Printed on recycled paper Printed in USA 11/00
R44-2017
Handheld Barcode Scanner
User's Guide