Bissell SWEEPER STURDY SWEEP 2402C Quick And Easy Assembly

2402C SWEEPER STURDY SWEEP

QUICK and EASY ASSEMBLY

1. Lay four handle sections out in a line with handle grip at the top and threaded

hole at bottom.

2. Fit smaller tapered end of each section into the larger end of the next one

and push together for a snug fit.

3. With the pieces assembled, strike down on a hard surface to firmly lock

sections together. (Use a book or magazine to protect your floor.)

4. Lift the ball (threaded metal bar on the top of sweeper) to vertical position.

Screw sweeper handle all the way down to the "shoulder" of threaded metal

ball. Failure to do this could cause the ball to break.

5. Snap brush comb on handle.

To learn more about this product visit:

www.bissell.com

BISSELL CONSUMER SERVICES:

1 800 263-2535

Or call us at:

Part# 010-5530

™

Table of Contents

Need help?

Do you have a question about the SWEEPER STURDY SWEEP 2402C and is the answer not in the manual?

Page 1 Screw sweeper handle all the way down to the "shoulder" of threaded metal ball. Failure to do this could cause the ball to break. 5. Snap brush comb on handle. To learn more about this product visit: www.bissell.com Or call us at: BISSELL CONSUMER SERVICES: 1 800 263-2535 Part# 010-5530...
Page 2 Limited Three Year Warranty BISSELL Ltd. will repair or replace, at BISSELL’s option, free of charge from the date of purchase by the original purchaser, any defective or malfunctioning part for a period of Three Years.