Introduction; Power Connection - Retro-Lux Ferguson 219A User Manual

Table of Contents

Advertisement

USER MANUAL
1

Introduction

Thank you for buying one of our beautiful radios! We hope it will provide hours of trouble-
free, high quality entertainment.
Your radio is easy to set up and use and, with a few simple precautions, will continue to
look good and operate efficiently for many years.
2

Power Connection

Fuse
If the switch fails to illuminate, first check that the mains supply is present, then disconnect
the supply and check the fuse in the mains plug and the unit inlet connector. In the unlikely
event that any of the fuses have blown the unit may be faulty.
Tel: +44 (0)1494 526270
ELECTRIC SHOCK RISK
This unit contains no user serviceable parts.
Under no circumstances remove the rear panel with the mains
Retro~Lux
is a trading name of Contrelec Ltd
High Wycombe ● Bucks ● England
Email: info@retro-lux.co.uk
Ferguson 219A
WARNING
voltage connected.
The power mains power connection is via
an IEC connector fitted at the rear. Insert
the supplied power lead and connect to a
mains outlet. Switch on the supply at the
mains outlet, and then operate the mains
switch on the unit. The switch will
illuminate if power is present, which
means that the unit is in standby mode.
If your radio is equipped with rechargeable
batteries, this is also the batteries will now
be charging. Charge the batteries for at
least 2 hours before running on batteries
alone.
Project No. 5055
Web: www.retro-lux.co.uk
Page 2

Advertisement

Table of Contents
loading

Table of Contents