Page 2
Silk’n™ is a powerful device. As such, it should be used with special attention to safety. Keep away from your eyes! Applying a Silk’n™ pulse to the eyes can cause serious eye injury Do not use Silk’n™ on tanned skin or after recent sun exposure! Such use can cause serious burns or skin injury.
Page 3
Copyright 2008 Home Skinovations Ltd. All rights reserved. Print date: February 2008 Home Skinovations Ltd. reserves the right to make changes to its products or specifications to improve performance, reliability, or manufacturability. Information furnished by Home Skinovations Ltd. is believed to be accurate and reliable at the time of publication.
Table of Contents 1. Before You Start..................p. 6 1.1. What is Silk’n™?..................p.6 1.2. Silk’n™ intended use................p.6 2. Safety with Silk’n™.................p.6 2.1. With Silk’n™ Safety Comes First.............p.6 2.2. Is Silk’n™ for you?..................p.6 2.3. When to avoid using Silk’n™?............p.8 2.4. Precautions – How to use Silk’n™ Safely.........p.8 2.5.
Page 5
First Steps with Silk’n™..............p.13 4.1. Silk’n™ device description..............p.13 4.2. Package contents..................p.13 4.3. Silk’n™ Setup....................p.13 4.4. Treating with Silk’n™ for the first time.........p.14 4.5. What to Expect when treating with Silk’n™?......p.15 4.6. After treating with Silk’n™..............p.15 Maintenance of Silk’n™..............p.16 5.1. Cleaning Silk’n™..................p.16 5.2.
1. Before You Start Before using Silk’n™ for the first time, please read this User Manual in its entirety. Pay particular attention to sections on device use procedures, device operation, and after-use procedures. We recommend you re-familiarize yourself with this User Manual before each use of Silk’n™. Silk’n™...
Page 7
DO NOT USE Silk’n™ on naturally dark skin complexion! Silk’n™ removes unwanted hair by selectively addressing hair pigment. Varied quantities of pigment also exist in the surrounding tissue of skin. The quantity of pigment in a particular person’s skin, which is manifested by their skin complexion, determines the degree of risk they are exposed to using Silk’n™.
NOTE! Silk’n™ is not effective on light hair The Silk’n™ device is not effective on naturally white, grey, blond and red body hair. If your body hair is of these colors, Silk’n™ will not work on you. 2.3. When to avoid using Silk’n™? Certain conditions may prevent the use of Silk’n™...
Avoid adverse effects! Do not treat the same area of skin more than once per hair removal session! Try to avoid overlapping pulses! If your skin blisters or burns, STOP USE IMMEDIATELY! Avoid complications after use of Silk’n™! Do not expose treated areas of skin to the sun. Be sure to carefully protect the treated skin with sunscreen, throughout the hair removal period and for at least 2 weeks following the last hair removal session.
Do not attempt to open or repair your Silk’n™ device. Only authorized Silk’n™ repair centers are permitted to perform repairs. Trying to open Silk’n™ may also damage the device and will void your warranty. Please contact Silk’n™ Customer Service if you have a broken or damaged device in need of repair. Use Silk’n™...
Pigment Changes Silk’n™ targets the hair shaft, in particular the pigmented cells in the hair follicle and the hair follicle itself. Nevertheless there is risk of temporary hyperpigmentation (increased pigment or brown discoloration) or hypopigmentation (whitening) to the surrounding skin. This risk of changes in skin pigmentation is higher for people with darker skin tones.
Anagen - Growth phase Catagen - Resting phase Telogen - Resting phase At any given moment the majority of the hair follicles in any skin area are Anagen in the resting phases. These resting hairs cannot be affected by Silk’n™. However, hairs in the growing Anagen phase will respond to Silk’n™...
Audio ON/OFF switch Cartridge 90% Usage Indicator Light Cartridge 100% Usage Indicator Light System Warning Indicator Light 4.2. Package contents Upon opening the Silk'n™ package, you will find the following parts: Silk'n™ b and A pplicAtor An AC cord A second d...
Do not raise the energy level if you experience abnormal discomfort during or after treating with Silk'n™! (See section 2.6 - “Possible Side Effects”) Do not raise the energy level during hair removal session even if you experience no discomfort. Discomfort may also appear some time after the session.
Covering skin areas Silk’n™ pulses should be administered in rows, starting at one end of each row and progressing sequentially towards the other end. This technique allows better control of skin coverage, and helps you avoid treating the same area more than once or overlapping skin areas.
Side effects and complications Some patients may experience pigmentation changes resulting from treating with Silk’n™. These effects, if they occur, are generally mild and transient. In case you experience any complication (See section 2.6 Possible Side Effects using Silk’n™) please contact your physician immediately.
6. Troubleshooting 6.1. “My Silk’n™ does not start.” Make sure the power cord is properly connected to the Silk’n™ device. Make sure the power cord is plugged into an electrical outlet on the wall. 6.2. “A light pulse is not emitted when I press the P ”.
8. Frequently Asked Questions 1. Does Silk’n™ really work? Yes. In clinical trials held by physicians, Silk’n™ was proven to safely achieve long-term hair removal results. 2. Where on my body can I use Silk’n™? The Silk’n™ device has been designed for full body hair removal. The most common areas treated with Silk’n™ are: legs, underarms, arms, bikini line and face.
Page 19
9. When will I see results from Silk’n™? As with any light-based or laser hair removal device, results are not immediate, and in fact you may not think anything happened at all. Hair may sometimes appear to be growing back after a hair removal session, but typically after two weeks many of these hairs will simply fall out.
uncertainty about sun exposure please contact your physician or Home Skinovations customer support. 17. Should I do anything before using Silk’n™? Before any Silk’n™ session it is important to avoid sun exposure on the treated area for at least four weeks. A high level UV Sun Screen (SPF 50+) will help, as will clothing covering the treated area.
10. Labeling - Class II equipment - Degree of protection against electric shock: type BF applied part - WEEE - Waste Electrical and Electronic Equipment - CE Mark - Follow operating instructions - This device comply with Part 15 of the (FCC) Federal Communications Commission Rules. - CSA Mark for USA and Canada.
EC Declaration of Conformity We Home Skinovations Ltd. declare under our sole responsibility that the home Skin treatment products Brand name: Home Skinovations Model name Models Number Silk’n AS101496A SensEpil AS101500A Are fully in conformity with the essential requirements of EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Page 23
Manufacturer: Home Skinovations Ltd. Apolo Building, Shaar Yokneam, POB 533, Yokneam 20692, ISRAEL Tel: +972-4-9097470 Fax: +972-4-9097471 Authorized Representative: Home Skinovations GMBH Dr. Kurt Huber Str.6 D-82031 Grunwald, GERMANY Tel: +49-89-64919530 Fax: +49-89-64919531 Gabi Lavi G.M. Hans Edel General Manager General Manager July 12, 2009 July 12, 2009...
Page 24
Silk’n™ is a physician recommended and innovative light-based device for hair removal in the privacy of your home. Safe, easy to use and cost effective, Silk’n™ achieves marked clinical results while offering personal convenience. Silk’n™ utilizes the highly sophisticated and new Home Pulsed Light™...
Need help?
Do you have a question about the Pro and is the answer not in the manual?
Questions and answers