Disassembly Of Indoor Units - Rio RIO09HP115V1A Installation, Service & Troubleshooting

Warning - Wait 10 minutes after power is disconnected before starting disassembly.
Hold On/Off button for 5 seconds to force a cooling operation for approximately 15 minutes.
1. Remove air filters
Step 1. Lift cover upward to lock open
2. Remove filter
Step 1. Lift center of air filter outward
Step 2. Remove air filter by pulling forward
Left and right filters are interchangeable.
To reinstall, insert air filter along the guide.
106
Disassembly of RIO Indoor Unit
12,000 btuh Other models may vary slightly